PDA

View Full Version : OpenPLi-2.1-beta-dm800se



Pages : [1] 2 3 4

gjstroom
07-12-2011, 05:46 AM
DAILYBUILDS STOPPED, USE PLI3.0 OR 4.0
Please note: The original PLi feeds for plugins and updates don't longer exist, this image uses a alternative feed

OpenPLi-2.1-beta-dm800se-DAILYBUILD by gjstroom

New image with SIM2 SSL84b and 'tweaked' 20120706 drivers.
PLi switched to 0328 drivers, so with this updated version you can do a safe online update until Pli decides to update again...
I also included the new OpenPLi 3.0 bootlogo's, they have a nice fresh 'look'.

http://img33.imageshack.us/img33/7969/ih5e.png

This image is a 100% build image from OpenPLi source, it uses tweaked 0328 drivers, which runs all plugins without patching.
You can use the update function, but if the PLi team switches to a new driver or ssl you may end up with a non functional box (which is an easy fix).
Check the PLi openembedded history (http://sourceforge.net/p/openpli/openembedded/ci/master/tree/) to be sure (click the history button) !

There's no active development for OpenPLi 2.1 any longer. Pli's customized Enigma2 is still maintained and is present in this image.
You can find all Enigma2 changes here (http://sourceforge.net/p/openpli/enigma2/ci/master/tree/) (click the history button).

Features:
source: daily fresh
drivers: 2012-07-06 (bcm7405.ko date 2011-11-09)
bootloader: ssl84b
size:43.8 mb

http://img31.imageshack.us/img31/7648/screenshot1dlp.jpg

Bootlogo:
standard bootlogo from OpenPLi 3.0

Plugins:
No additional plugins installed, use the plugins menu and download with the green button.

http://img683.imageshack.us/img683/2052/openwebif800se.png

Image flashing:
Be sure you have SSL84 (http://bbs.dreamoem.com/attachment.php?attachmentid=128&d=1323833483) on your box, if you get the "INVALID IMAGE (OR OLD VERSION)" error, flash SSL84 (http://bbs.dreamoem.com/attachment.php?attachmentid=128&d=1323833483) first and try again.
If your box is already at SSL84x you can flash the image immediately, the new SSL84b is included in the image !
Internet Explorer (recommended)
DreamUp
Powercycle after flashing

Skins:
PLi-HD

Daily fresh download:

Download (http://dl.dropbox.com/u/9860949/dm800se/dm800se-21daily.html)

ps. The Screenshots are not up to date.

Older versions:

Download (https://mega.co.nz/#F!ZogSTBLT!WjYSrnnAjX0Y8_EWH_p3ng)



Keep in mind PLi2.1 development stopped somewhere September 2012 but the Enigma2 included in my images is the same one used in Pli3.0. It's possible this broke something which causes some plugins to fail. I can (and will) not test every plugin, even the PLi original ones, the image is a default plain PLi image only the necessary things like drivers and ssl are replaced. If it doesn't work it probably also won't work on a original box !

crille4
07-12-2011, 06:59 AM
on your last version i used the update function, but you get a new keymap so make a backup of it if you need timeshift on pause button

gjstroom
08-12-2011, 01:06 AM
I changed the keymap to get the 3 row remote working like crille4 says.
The keymap is part of the Enigma2 and this module is updated very frequent, so it overwrites the keymap with a default one.

gjstroom
14-12-2011, 06:23 AM
New version in startpost: OpenPLi-2.1-beta-dm800se-20111212

satmru
16-12-2011, 03:39 AM
Hey, thanks for this image. It's very nice and table. Like the new web interface much better. can't wait for the next update. cheers mate.

FoRMat MaSTer
16-12-2011, 05:03 AM
Great image but this beta has a problem with openvpn. For some reason it doesn't load the tun.ko properly and even if you put it in the right folder from another image it still doesn't recognize it. Other than that it looks stable. Thanx guys

gjstroom
04-01-2012, 06:17 AM
New version posted in topic start.
Openwebif has now streaming support when you click on the stream icon of the desired channel in your bouquets. It will open a stream.m3u file which you can use to play in VLC.
I also fixed the keymap file again to get play/pause working when using the 3 row remote.
Beware when you a update, the keymap will be overwritten with a default one. You can make backup of the file first, it's located at /usr/share/enigma2/keymap.xml

IAmATeaf
07-01-2012, 04:43 AM
@gjstroom - how or where could I obtain the source file InfoBarGenerics.py for this image?

I wanted to do a mod so that the infobar fades/dims out and looking at other images I've worked out I need to mod the above file.

cokesux
07-01-2012, 05:06 AM
opkg install enigma2-src

--

IAmATeaf
07-01-2012, 05:42 AM
opkg install enigma2-src

--

is enigma2-src part of the image?

cokesux
07-01-2012, 06:02 AM
The ipk contains the .py files that OpenPLi doesn't include in the image by default (to save space).

--

IAmATeaf
07-01-2012, 06:28 AM
OK, so probably a dumb question but where do I get the source ipk file from?

cokesux
07-01-2012, 06:40 AM
telnet > dreambox > enter on command line:

opkg update (hit enter)
opkg install enigma2-src (hit enter)

or if you don't want them actually installed on the dreambox, but rather just download the ipk:

cd /tmp
opkg update (hit enter)
opkg download enigma2-src (hit enter)

... at which point you'll find the ipk downloaded to the DB's /tmp...

IAmATeaf
08-01-2012, 02:03 AM
Cheers cokesux, got the file extracted from the source and am looking at it right now :)

NinjaAsok
21-01-2012, 06:12 PM
Im having problems with dvb-c with the OpenPLi-2.1-beta-dm800se-20120103-sim210-ssl84b build... in automatic scan it finds the transponders but no services...

gjstroom
22-01-2012, 08:11 PM
Im having problems with dvb-c with the OpenPLi-2.1-beta-dm800se-20120103-sim210-ssl84b build... in automatic scan it finds the transponders but no services...
It's working fine here with the Philips tuner, did you also try the cable scan ?

NinjaAsok
23-01-2012, 06:24 PM
Cable scan just says "failed..." the automatic scan does find the Transponders but no services(channels)...

Same hardware finds all services on automatic scan with i iCVS, newnigma2 and Domica9a firmwares.. without making any special settings..

My Tuner is identified as : Philips CU1216Mk3 DVB-C

i might have another tuner i could try also.... but that might also be a Philips..

// Regards
// NinjaAsok

gjstroom
23-01-2012, 07:57 PM
Cable scan just says "failed..." the automatic scan does find the Transponders but no services(channels)...

Same hardware finds all services on automatic scan with i iCVS, newnigma2 and Domica9a firmwares.. without making any special settings..

My Tuner is identified as : Philips CU1216Mk3 DVB-C

i might have another tuner i could try also.... but that might also be a Philips..

I have the same tuner, no problems...
Make a telnet session to your box, enter the following:
init 4
enigma2

now you see all enigma logging, perform a cable scan and look if you see some errors, maybe capture the in a file.

to go back to normal mode

press ctrl-c
init 3

Mavve
25-01-2012, 08:33 PM
Helping a fried with his cable-box, same problem here! It finds the transponders but then no channels. When trying cable scan, just failed. Tried DE 3.0 and it find every thing! But the subtitles are bad as always when not using PLi!

Will see if i have some time over tomorrow and go over to my friend and i will try your thing about enigma logging.

gjstroom
25-01-2012, 09:07 PM
Helping a fried with his cable-box, same problem here! It finds the transponders but then no channels. When trying cable scan, just failed. Tried DE 3.0 and it find every thing! But the subtitles are bad as always when not using PLi!

Will see if i have some time over tomorrow and go over to my friend and i will try your thing about enigma logging.

When using cables scan you should see something like this:


[SKIN] Parsing embedded skin <embedded-in-'CableScanStatus'>
[eDVBLocalTimerHandler] remove channel 0x1483410
[eEPGCache] remove channel 0x1483410
[EPGC] abort caching events !!
allocate demux
(0)tune
tuning to 372000 khz, sr 6875000, fec 9, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0010: 40 15 b3 00 00 00
mask: fe ff ff 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
---+ 1/4 TID 41
[DVBCAHandler] no more services
+--+ 2/4 TID 41
++-+ 3/4 TID 41
++++ 4/4 TID 41
done!
eCableScan::NITReady 0
Cable freq 834000, mod 3, sr 6875000, fec 15
Cable freq 340000, mod 3, sr 6875000, fec 15
Cable freq 348000, mod 3, sr 6875000, fec 15
Cable freq 356000, mod 3, sr 6875000, fec 15
Cable freq 364000, mod 3, sr 6875000, fec 15
Cable freq 380000, mod 3, sr 6875000, fec 15
Cable freq 372000, mod 3, sr 6875000, fec 15
Cable freq 388000, mod 3, sr 6875000, fec 15
Cable freq 396000, mod 3, sr 6875000, fec 15
Cable freq 404000, mod 5, sr 6875000, fec 15
Cable freq 412000, mod 5, sr 6875000, fec 15
Cable freq 420000, mod 5, sr 6875000, fec 15
Cable freq 428000, mod 5, sr 6875000, fec 15
Cable freq 436000, mod 5, sr 6875000, fec 15
Cable freq 444000, mod 5, sr 6875000, fec 15
Cable freq 810000, mod 3, sr 6875000, fec 15
Cable freq 332000, mod 3, sr 6875000, fec 15
Cable freq 842000, mod 3, sr 6875000, fec 15
Cable freq 778000, mod 3, sr 6875000, fec 15
Cable freq 562000, mod 3, sr 6875000, fec 15
Cable freq 586000, mod 3, sr 6875000, fec 15
Cable freq 770000, mod 3, sr 6875000, fec 15
Cable freq 578000, mod 3, sr 6875000, fec 15
Cable freq 490000, mod 3, sr 6875000, fec 15
Cable freq 162000, mod 3, sr 6875000, fec 15
Cable freq 170000, mod 3, sr 6875000, fec 15
Cable freq 826000, mod 3, sr 6875000, fec 15
Cable freq 722000, mod 3, sr 6875000, fec 15
Cable freq 786000, mod 3, sr 6875000, fec 15
Cable freq 522000, mod 3, sr 6875000, fec 15
Cable freq 474000, mod 3, sr 6875000, fec 15
Cable freq 802000, mod 3, sr 6875000, fec 15
(0)tune
tuning to 834000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 340000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 348000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 356000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 364000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 380000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 372000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+- 1/2 TID 42
++ 2/2 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 388000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 396000 khz, sr 6875000, fec 0, modulation 3, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 404000 khz, sr 6875000, fec 0, modulation 5, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!
eCableScan::SDTReady 0
(0)tune
tuning to 412000 khz, sr 6875000, fec 0, modulation 5, inversion 2
OURSTATE: tuning
no version filtering
0011: 42 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
+ 1/1 TID 42
done!

-cut-

eCableScan::SDTReady 0
loading bouquet... /etc/enigma2/userbouquet.Ziggo.tv
can't open /etc/enigma2/userbouquet.Ziggo.tv: No such file or directory
loading bouquet... /etc/enigma2/userbouquet.Ziggo.radio
can't open /etc/enigma2/userbouquet.Ziggo.radio: No such file or directory
---- saving lame channel db
saved 32 channels and 353 services!
close frontend 0

NinjaAsok
27-01-2012, 11:55 AM
Ive captured the output of my autoscan as per your instructions.. theres alot of failed stuff..



TDA1002x CMD is tda1002x --init --scan --verbose --wakeup --inv 2 --bus 2 --scan-bands 127 --mod 64 --mod 256 --sr 6900000 --sr 6875000
OK 306000 0 FEC_AUTO QAM64 INVERSION_ON

OK 314000 0 FEC_AUTO QAM64 INVERSION_ON

OK 322000 0 FEC_AUTO QAM64 INVERSION_ON

OK 338000 0 FEC_AUTO QAM64 INVERSION_ON

OK 346000 0 FEC_AUTO QAM64 INVERSION_ON

OK 354000 0 FEC_AUTO QAM64 INVERSION_ON

OK 362000 0 FEC_AUTO QAM64 INVERSION_ON

OK 378000 0 FEC_AUTO QAM64 INVERSION_ON

OK 386000 0 FEC_AUTO QAM64 INVERSION_ON

OK 394000 0 FEC_AUTO QAM64 INVERSION_ON

OK 402000 0 FEC_AUTO QAM64 INVERSION_ON

OK 418000 0 FEC_AUTO QAM64 INVERSION_ON

OK 434000 0 FEC_AUTO QAM256 INVERSION_ON

OK 442000 0 FEC_AUTO QAM256 INVERSION_ON

OK 450000 0 FEC_AUTO QAM256 INVERSION_ON

OK 458000 0 FEC_AUTO QAM256 INVERSION_ON

OK 466000 0 FEC_AUTO QAM256 INVERSION_ON

OK 474000 0 FEC_AUTO QAM256 INVERSION_ON

OK 482000 0 FEC_AUTO QAM256 INVERSION_ON

OK 634000 0 FEC_AUTO QAM256 INVERSION_ON

OK 642000 0 FEC_AUTO QAM256 INVERSION_ON

OK 650000 0 FEC_AUTO QAM256 INVERSION_ON

OK 658000 0 FEC_AUTO QAM256 INVERSION_ON

OK 666000 0 FEC_AUTO QAM256 INVERSION_ON

OK 674000 0 FEC_AUTO QAM256 INVERSION_ON

OK 682000 0 FEC_AUTO QAM256 INVERSION_ON

OK 690000 0 FEC_AUTO QAM256 INVERSION_ON

OK 698000 0 FEC_AUTO QAM256 INVERSION_ON

OK 714000 0 FEC_AUTO QAM64 INVERSION_ON

OK 730000 0 FEC_AUTO QAM64 INVERSION_ON

OK 738000 0 FEC_AUTO QAM64 INVERSION_ON

OK 746000 0 FEC_AUTO QAM256 INVERSION_ON

OK 786000 0 FEC_AUTO QAM256 INVERSION_ON

child has terminated
pipes closed
cableTransponderSearch finished 0
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
cableTransponderSearchSessionClosed, val (True,)
ServiceScanCreateSummary
[SKIN] Parsing embedded skin <embedded-in-'ServiceScanSummary'>
opening frontend 0
allocate demux
(0)tune
tuning to 306000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 314000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 322000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 338000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 346000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 354000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
It's now Sat Jan 1 01:23:14 2000
[timer.py] next activation: 946686294 (in 99998 ms)
It's now Sat Jan 1 01:23:14 2000
[timer.py] next activation: 946686294 (in 99997 ms)
OURSTATE: failed, fatal
(0)tune
tuning to 362000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 378000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 386000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 394000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 402000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 418000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 434000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 442000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 450000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 458000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 466000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 474000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 482000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 634000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 642000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 650000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 658000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 666000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 674000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 682000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
It's now Sat Jan 1 01:24:54 2000
[timer.py] next activation: 946686394 (in 99999 ms)
It's now Sat Jan 1 01:24:54 2000
[timer.py] next activation: 946686394 (in 99997 ms)
OURSTATE: failed, fatal
(0)tune
tuning to 690000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 698000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 714000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 730000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 738000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 746000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune
tuning to 786000 khz, sr 0, fec 9, modulation 5, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
no channels left to scan.
0 channels scanned, 33 were unavailable.
0 channels in database.
---- saving lame channel db
saved 0 channels and 0 services!
scan done!

gjstroom
27-01-2012, 04:55 PM
Ive captured the output of my autoscan as per your instructions.. theres alot of failed stuff..

That's not a cable scan !

NinjaAsok
27-01-2012, 09:43 PM
Nope its an Autoscan... and thats whats works on all other images ive tried...

but i can try and do a cable scan tomorrow also... got to much beer in me now :-)

btw doesent this part look weird in the autoscan log..

"FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal"

gjstroom
27-01-2012, 10:05 PM
Nope its an Autoscan... and thats whats works on all other images ive tried...

but i can try and do a cable scan tomorrow also... got to much beer in me now :-)

btw doesent this part look weird in the autoscan log..

"FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal"
Please post some info about your cable provider as well. Does your provider use one of the frequencies in the list you posted ???

gjstroom
28-01-2012, 02:04 PM
New version, based on 20120128 source, see topic start.
This one also has the first stage bootlogo fixed, previous versions didn't show it.
I made a slightly customized bootlogo.
Enjoy !

IAmATeaf
28-01-2012, 09:31 PM
Can't seem to download the latest image, the page that gets displayed doesn't scroll left to right so I can't start the download, is this the same for anybody else or just me?

Tried with both IE and FF and get the same results.

EDIT: Forget the above, it's just me being an idiot :D

secaspider
29-01-2012, 09:21 AM
What can I say. Nice bootlogo, everything works perfect, and as usual openpli is very very fast. I am going to leave it for a few days in flash. Did you say is available to update it, but we must check first somethinh on the internet so we don´t kill the box?. What would it be the update we don´t have to run the risk, if we see in the website you published?
Thank you for the work Gjstroom

gjstroom
29-01-2012, 10:52 AM
What can I say. Nice bootlogo, everything works perfect, and as usual openpli is very very fast. I am going to leave it for a few days in flash. Did you say is available to update it, but we must check first somethinh on the internet so we don´t kill the box?. What would it be the update we don´t have to run the risk, if we see in the website you published?
Thank you for the work Gjstroom
In general you can run the update function but keep in mind it will kill some things.
-keymap.xml for 3 row remote (comes with every enigma update), copy /usr/share/enigma2/keymap.xml to your hdd or usb and copy it back after update.
-The Openwebif port changes back to it's default port (8088), you can change it back in the plugin menu.

When Pli decides to use new drivers or a new SSL, it's more serious.
Look for dreambox-dvb-modules and dreambox-secondstage updates before updating in the PLi openembedded shortlog (http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=shortlog)

You can also install a rss reader:
-opkg install enigma2-plugin-extensions-newsreader
Add the following to /etc/feeds.xml


<feed>
<name>[NL] PLi: OpenPLi org.openembedded.dreambox branch</name>
<url>http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=rss</url>
</feed>
<feed>
<name>[NL] PLi: OpenPLi enigma2 GPL branch</name>
<url>http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2;a=rss</url>
</feed>
<feed>
<name>[NL] PLi: OpenPLi enigma2 plugins</name>
<url>http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/enigma2-plugins;a=rss</url>
</feed>

stelsi
29-01-2012, 11:43 AM
hi everyone,prompt as on pli to do DTS sound ?for medioplayer mkv

dizzynonun
29-01-2012, 03:00 PM
What is 3 row remote? I'm updating it everyday and didn't recognize any lacks when using my remote control. Am I missing something?

NinjaAsok
29-01-2012, 04:45 PM
Tried the new 20120128 version... but same results...

i also reinstalled the domica firmware and made the same same scan and saved the logfile...

Heres a quick peek of one of the transponder scans using the automatic scan...

Image: OpenPLi-2.1-beta-dm800se-20120128-sim210-ssl84b.nfi


tuning to 306000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune


Image: DOMICA-image-9a-dm800se-ramiMAHER.nfi


tuning to 306000 khz, sr 6875000, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
no version filtering
0000: 00 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
no version filtering
0010: 40 00 00 00 00 00
mask: ff 00 00 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 00
done!
got pat
got pmt -2
no version filtering
0104: 02 04 28 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
no version filtering
0011: 42 00 28 00 00 00
mask: fb ff ff 00 00 00
mode: 00 00 00 00 00 00
+--- 1/4 TID 40
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0101: 02 04 29 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
++-- 2/4 TID 40
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0122: 02 04 2a 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
no version filtering
0133: 02 04 2b 00 00 00
mask: ff ff ff 00 00 00
mode: 00 00 00 00 00 00
+ 1/1 TID 02
done!
got pmt 0
+++- 3/4 TID 40
++++ 4/4 TID 40
done!
got nit, err 0
dumping NIT
TSID: 001e ONID: a027
Cable freq 322000, mod 3, sr 6875000, fec 15
try to add 322000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 001f ONID: a027
Cable freq 314000, mod 3, sr 6875000, fec 15
try to add 314000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0020 ONID: a027
Cable freq 338000, mod 3, sr 6875000, fec 15
try to add 338000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0021 ONID: a027
Cable freq 362000, mod 3, sr 6875000, fec 15
try to add 362000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0022 ONID: a027
Cable freq 354000, mod 3, sr 6875000, fec 15
try to add 354000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0023 ONID: a027
Cable freq 370000, mod 3, sr 6875000, fec 15
try to add 370000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0024 ONID: a027
Cable freq 378000, mod 3, sr 6875000, fec 15
try to add 378000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0025 ONID: a027
Cable freq 386000, mod 3, sr 6875000, fec 15
try to add 386000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0026 ONID: a027
Cable freq 346000, mod 3, sr 6875000, fec 15
try to add 346000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0027 ONID: a027
Cable freq 394000, mod 3, sr 6875000, fec 15
try to add 394000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0028 ONID: a027
Cable freq 306000, mod 3, sr 6875000, fec 15
try to add 306000 6875000 3 15
is current
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0029 ONID: a027
Cable freq 402000, mod 3, sr 6875000, fec 15
try to add 402000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002a ONID: a027
Cable freq 714000, mod 3, sr 6875000, fec 15
try to add 714000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002b ONID: a027
Cable freq 730000, mod 3, sr 6875000, fec 15
try to add 730000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002c ONID: a027
Cable freq 738000, mod 3, sr 6875000, fec 15
try to add 738000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002d ONID: a027
Cable freq 290000, mod 3, sr 6875000, fec 15
try to add 290000 6875000 3 15
really add
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002e ONID: a027
Cable freq 746000, mod 5, sr 6875000, fec 15
try to add 746000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 002f ONID: a027
Cable freq 298000, mod 3, sr 6875000, fec 15
try to add 298000 6875000 3 15
really add
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0030 ONID: a027
Cable freq 418000, mod 3, sr 6875000, fec 15
try to add 418000 6875000 3 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0031 ONID: a027
Cable freq 786000, mod 5, sr 6875000, fec 15
try to add 786000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0032 ONID: a027
Cable freq 434000, mod 5, sr 6875000, fec 15
try to add 434000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0033 ONID: a027
Cable freq 442000, mod 5, sr 6875000, fec 15
try to add 442000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0034 ONID: a027
Cable freq 450000, mod 5, sr 6875000, fec 15
try to add 450000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0035 ONID: a027
Cable freq 458000, mod 5, sr 6875000, fec 15
try to add 458000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0036 ONID: a027
Cable freq 466000, mod 5, sr 6875000, fec 15
try to add 466000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0037 ONID: a027
Cable freq 474000, mod 5, sr 6875000, fec 15
try to add 474000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
TSID: 0038 ONID: a027
Cable freq 482000, mod 5, sr 6875000, fec 15
try to add 482000 6875000 5 15
update
already in todo list
descr<41>
descr<5f>
descr<83>
descr<5f>
descr<82>
+ 1/1 TID 42
done!
got sdt 0
SDT:
ONID: a027
SID 0429: name 'XXX', provider_name 'XXX'
SID 042a: name XXX', provider_name 'XXX'
SID 042b: name 'XXX', provider_name 'XXX'
SID 0428: name 'XXX', provider_name 'XXX'
channel done!
(0)tune


Complete logfiles sent in private message :-)

The Cablescan functions dont seem to ever get a lock... get scan failed what ever i enter...

// NinjaAsok

cokesux
29-01-2012, 04:55 PM
Did you try installing the cable.xml from one of the images that scan correctly, to OpenPLi? Perhaps there's an error on the PLi xml, missing SymbolRate perhaps? Or perhaps manually tune a TP (if possible w/ cable tuner), using info discovered from one of the working images?


--

gjstroom
29-01-2012, 09:35 PM
Tried the new 20120128 version... but same results...

i also reinstalled the domica firmware and made the same same scan and saved the logfile...

Heres a quick peek of one of the transponder scans using the automatic scan...

Image: OpenPLi-2.1-beta-dm800se-20120128-sim210-ssl84b.nfi


tuning to 306000 khz, sr 0, fec 9, modulation 3, inversion 1
OURSTATE: tuning
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
FE_SET_FRONTEND failed: Invalid argument
OURSTATE: failed, fatal
(0)tune

The Cablescan functions dont seem to ever get a lock... get scan failed what ever i enter...

Somehow the symbolrate=0 instead of 6875000...
I have a look at your complete log tomorrow.
Did you try the cablescan already ?

NinjaAsok
30-01-2012, 10:57 AM
Not sure on what i should enter in the cablescan, evreything i tried has resulted in "scan failed..."

gjstroom
30-01-2012, 07:45 PM
Not sure on what i should enter in the cablescan, evreything i tried has resulted in "scan failed..."
You need some settings provided by your cable provider, they provide these settings for original cable boxes as well (at least my provider does).

crille4
31-01-2012, 12:21 AM
Its the multimedia buttons play/pause/stop/rew, the timeshift button stop work after update

What is 3 row remote? I'm updating it everyday and didn't recognize any lacks when using my remote control. Am I missing something?

secaspider
31-01-2012, 10:13 AM
I think for the last updates it is not worth it the upgrading. I stay with the gjstroom published.

dizzynonun
31-01-2012, 07:24 PM
how do i change or reorder the items in blue button where it says "Please choose an extension..."
Also how do i reorder the plugins in plugins menu?

cokesux
31-01-2012, 07:40 PM
I believe they list in alphabetical order, like the All Services view in the service selector. I guess you could try renaming the plugins if you had your heart set on it...

--

amon35
01-02-2012, 09:11 PM
perfect team sim2

Thank you

gjstroom
04-02-2012, 06:11 PM
If you want to do online updates, you can trick the box so it skips the dvb-modules update (you need some vi knowledge)
- telnet to your console
- vi /usr/lib/opkg/status
- search for the following lines ( use /revert [enter] to search):
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20111109-revert-20110902-r6.3
- Change the line starting with 'Version' in (use i to go to insert mode):
Version: 2.6.18-7.4-dm800se-20120202-r6.3
- Press [esc] :wq [enter] to save and close

Now you can do a online update using the menu or use the following commands:
- opkg update
- opkg upgrade

secaspider
05-02-2012, 08:56 AM
I tried to do a backup using tolls of TSpannel and the box crash and died. I have to reinstall (i hope the image back) what to do with Openpli to be able backup the image on flash?

gjstroom
05-02-2012, 11:38 AM
I tried to do a backup using tolls of TSpannel and the box crash and died. I have to reinstall (i hope the image back) what to do with Openpli to be able backup the image on flash?
I most cases backup programs like dflash won't work because of PLi hasn't got the /boot mounted like other images do.
Add this to your /etc/fstab file.
/dev/mtdblock2 /boot jffs2 ro 0 0

You also can install enigma2-plugin-extensions-nfibackup (opkg install enigma2-plugin-extensions-nfibackup).
This needs some work:
- edit /usr/lib/enigma2/python/Plugins/Extensions/NfiBackup/plugin.py
change the line: config.plugins.NfiBackup.SSL = ConfigSelectionNumber(66, 76, 1, default = 76)
to: config.plugins.NfiBackup.SSL = ConfigSelectionNumber(66, 84, 1, default = 84)

- edit /usr/bin/build-nfi-image.sh
comment (place # at start of line) each line that contains wget

- upload ssl84b.bin to your box in directory: /media/hdd/backup/NFI-Backup/SSL/ or /media/usb/backup/NFI-Backup/SSL/
and rename the file secondstage-dm800-84.bin
optional you can make a file called secondstage-dm800-84.bin.md5 with the md5 hash inside of the file

- don't mind the errors displaying when making a backup.

secaspider
05-02-2012, 01:18 PM
It is peculiar because althought the image crash the backup image done by tspannel plugin tools, stayed on the folder \backup on the harddisk.
I uploaded again but the channel lists is gone. The rest was ok.
Thankyou very much for the information. Gjstroom

secaspider
06-02-2012, 10:39 AM
Waiting for the new image with the new drivers. It is really nice image!!!. The thing most amazed me is tue fastest it is.

dizzynonun
06-02-2012, 03:49 PM
If you want to do online updates, you can trick the box so it skips the dvb-modules update (you need some vi knowledge)
- telnet to your console
- vi /usr/lib/opkg/status
- search for the following lines ( use /revert [enter] to search):
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20111109-revert-20110902-r6.3
- Change the line starting with 'Version' in (use i to go to insert mode):
Version: 2.6.18-7.4-dm800se-20120216-r6.3
- Press [esc] :wq [enter] to save and close

Now you can do a online update using the menu or use the following commands:
- opkg update
- opkg upgrade

The drivers changed again as of 02/16, so change this to be able to use software update without problems:

Use an FTP application (DCC E2 is recommended) to edit this file on the box:

/usr/lib/opkg/status

just change the phrase;

"Version: 2.6.18-7.4-dm800se-20111109-revert-20110902-r6.3"

with:

"Version: 2.6.18-7.4-dm800se-20120216-r6.3"

and save.

If you are using software update after a fresh install of the image provided in the first post; first thing: restart the device after making changes, then do software update and then restart the device twice. It will be all done.

gjstroom
06-02-2012, 07:37 PM
In my opinion it makes no sense to do the newdriver with old bcm*.ko trick like Rami and others do. All changes that matter are in the bcm driver files...
I wait for a new SSL.

dizzynonun
07-02-2012, 01:00 AM
..........

Bassie
07-02-2012, 01:04 AM
Why not update did work fine overhere when its filled in the correct way.

Just shoot, and when it shits the bed :P you just copy over the old lovely last working driver, reboot and be happy...

secaspider
07-02-2012, 07:49 AM
I did not decided update until gsjtroom don´t lauch the new one. This one works fine ayway. I cannot see what is the reason for updating.

stelsi
07-02-2012, 02:55 PM
prompt,what do DTS sound,or this impossible?

gjstroom
07-02-2012, 10:43 PM
prompt,what do DTS sound,or this impossible?
I heard PLi has no dts support.

binsat
08-02-2012, 12:23 AM
actually some of the images what are theoretically dts-capable wont actually work anyway. not even dts bypass mode so you cant hear any sound. i tried various scene releases with dts sound. maybe some silly format dts is playable but i havent seen such yet nor have i any interest in them.
obviously will replace dm crap because of this. no point having additional hd media boxes to play dts.. dts is essential these days!

gjstroom, big thanks for all the hard work and share you done! the best images for clone.

stelsi
08-02-2012, 05:20 PM
actually some of the images what are theoretically dts-capable wont actually work anyway. not even dts bypass mode so you cant hear any sound. i tried various scene releases with dts sound. maybe some silly format dts is playable but i havent seen such yet nor have i any interest in them.
obviously will replace dm crap because of this. no point having additional hd media boxes to play dts.. dts is essential these days!

gjstroom, big thanks for all the hard work and share you done! the best images for clone.

on other images dts works

Mavve
08-02-2012, 08:43 PM
You need some settings provided by your cable provider, they provide these settings for original cable boxes as well (at least my provider does).

Today i were able to try agian. And with the right numbers the cable scan work perfect! thanks for info!

But i got the same result on the automatic scan, fail on all transponders.. but now i dont care :)

binsat
08-02-2012, 10:43 PM
on other images dts works
sounds very interesting! please can you name them, exact image(s) what should we test? and how it works, i mean dts downmix or bypass, what files work for you etc. most "other" images dont work for sure.
here's a little sample file with dts audio track for testing: http://rghost.net/36418813

stelsi
10-02-2012, 03:49 PM
sounds very interesting! please can you name them, exact image(s) what should we test? and how it works, i mean dts downmix or bypass, what files work for you etc. most "other" images dont work for sure.
here's a little sample file with dts audio track for testing: http://rghost.net/36418813

given by you test(sample) was опробыван on images DOMICA-image-9a-dm800se, Dream-Elite-3.0-dm800se, iCVS-dm800se, ramiMAHER-v22 DTS- ok!
on PLI is not got put(deliver) DreamDTS1.0-r4_DM800SE dts?
installed on methods described here is here:http://www.domica.biz/index.php?topic=10962.0 likes pli,absence dts big minus

cokesux
10-02-2012, 04:30 PM
IIRC DMM never bothered to acquire the license for DTS audio. Images that respect licenses, like OpenPLi, will not include support. Images that don't really care about licensing are able to include the support for whatever they like...


-- .

binsat
11-02-2012, 03:40 PM
thanks stelsi for the information! dts downmix really works when using this workaround method. unfortunately none of these images is usable for my needs because of horrible subtitle bugs and missing must-have features i need. :( only pli managed to fix these problems so far.
when trying to use the same method on pli.. i guess there's something missing in pli image what makes patched genuine plugin not to run and therefore making dts downmixing non-workable as well. we need figure out how to make it work in pli and fix it.. i guess nobody here cares about dm licencing policies and such crap anyway. do we? :)

satpolare
11-02-2012, 08:05 PM
Unable to make OpenVPN work

satpolare
11-02-2012, 09:15 PM
just install the following file using opkg install < filename>

//jb

gjstroom
12-02-2012, 09:19 AM
actually some of the images what are theoretically dts-capable wont actually work anyway. not even dts bypass mode so you cant hear any sound. i tried various scene releases with dts sound. maybe some silly format dts is playable but i havent seen such yet nor have i any interest in them.
obviously will replace dm crap because of this. no point having additional hd media boxes to play dts.. dts is essential these days!
gjstroom, big thanks for all the hard work and share you done! the best images for clone.

I did some digging and got dts working, although it has some hiccups now and then. I use spdif because my tv (hdmi) can't passthrough ac3/dts to my 5.1 amplifier.
See also this (openpli.org/forums/topic/18725-dts-downmix-patch-in-gst-plugin-dvbmediasink-no-longer-available/page__hl__downmix__st__20) article at the PLi forum.

Download this file 480

unzip and ftp (dcc) them to your box in /tmp.

Do a telnet to your box and type:

opkg install /tmp/gst-plugin-dvbmediasink_0.10\%2bgit20110210-r1_dm800se.ipk --force-downgrade (not necessary)
opkg install /tmp/enigma2-plugin-extensions-genuinedreambox_experimental-git20120211-r0_dm800se.ipk
opkg install /tmp/dreamdts_1.0-r8_mipsel.ipk

restart enigma2

try if it works for you...

[edit1]
I think the gst-plugin-dvbmediasink needs not to be installed. It only replaces:
/usr/lib/gstreamer-0.10/libgstdvbvideosink.so
/usr/lib/gstreamer-0.10/libgstdvbaudiosink.so
With original files it also works.

[edit2]
Just tested with my latest image with no moderation's it also plays dts (with some hiccups).

secaspider
12-02-2012, 01:43 PM
Thank you very much my friend. This is a great new. I will try when I can , and I will write my experience. Actually I have got on flash your Openpli from the 28th January I think, in other words the last one.

Bassie
12-02-2012, 03:48 PM
[edit1]
I think the gst-plugin-dvbmediasink needs not to be installed. It only replaces:
/usr/lib/gstreamer-0.10/libgstdvbvideosink.so
/usr/lib/gstreamer-0.10/libgstdvbaudiosink.so
With original files it also works.


I did follow this install routine from PLi some time ago, and dvbmediasink plugin get overwritten when updating, so its good to skip this step indeed :)

iMAAK
12-02-2012, 04:49 PM
This is a great simple yet stable image.

I have a question, when I go to Setup> Software management> Software update, the device finds (57 Packages) ready for update, is it safe to update the software? Please let me know.

Bassie
12-02-2012, 04:53 PM
Yes, but http://www.dreamoem.com/showthread.php?250-OpenPLi-2.1-beta-dm800se&p=4336&viewfull=1#post4336

iMAAK
12-02-2012, 05:17 PM
Thank you Bassie for your promp input. I would prefer not to update the software and wait for gjstroom to issue a new image with new drivers. The image is just working fine. I hope Barry Allen works fine too, yet to be installed.

Bassie
12-02-2012, 05:50 PM
Barry allen dont play nice on PLi images, agree have to wait for the sim team to get a new loader 85 and/or probally together with new 2012 Febuary drivers.

binsat
12-02-2012, 10:32 PM
I did some digging and got dts working, although it has some hiccups now and then. I use spdif because my tv (hdmi) can't passthrough ac3/dts to my 5.1 amplifier.
See also this (openpli.org/forums/topic/18725-dts-downmix-patch-in-gst-plugin-dvbmediasink-no-longer-available/page__hl__downmix__st__20) article at the PLi forum.

Download this file 480

unzip and ftp (dcc) them to your box in /tmp.

Do a telnet to your box and type:

opkg install /tmp/gst-plugin-dvbmediasink_0.10\%2bgit20110210-r1_dm800se.ipk --force-downgrade (not necessary)
opkg install /tmp/enigma2-plugin-extensions-genuinedreambox_experimental-git20120211-r0_dm800se.ipk
opkg install /tmp/dreamdts_1.0-r8_mipsel.ipk

restart enigma2

try if it works for you...

[edit1]
I think the gst-plugin-dvbmediasink needs not to be installed. It only replaces:
/usr/lib/gstreamer-0.10/libgstdvbvideosink.so
/usr/lib/gstreamer-0.10/libgstdvbaudiosink.so
With original files it also works.

[edit2]
Just tested with my latest image with no moderation's it also plays dts (with some hiccups).

Thanks for guidance! Can't say anything about passthrough myself cause i found out my old panny refuses to play dts from these BR rips, it plays some older kind dts crap only. I bet getting dts downmix to work is main goal anyway.
Unfortunately i can't get downmix function like this. I made fresh reflash using your OpenPLi-2.1-beta-dm800se-20120128,
md5 hash: 0e5d0300387d2253b29a479ea6531ff8,
no any customizations or stuff installed, so absolutely virgin image in flash..


root@dm800se:/var/volatile/tmp# opkg install enigma2-plugin-extensions-genuinedreambox_experimental-git20120211-r0_dm800se.ipk
Installing enigma2-plugin-extensions-genuinedreambox (experimental-git20120211-r0) to root...
Configuring enigma2-plugin-extensions-genuinedreambox.

root@dm800se:/var/volatile/tmp# opkg install dreamdts_1.0-r8_mipsel.ipk
Installing dreamdts (1.0-r8) to root...
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies for dreamdts:
* libdca0 * libdca0 (>= 0.0.5) *
* opkg_install_cmd: Cannot install package dreamdts.



You didn't get dependency error? Maybe you tested it on some other version, did some update before or are you using pli in multiboot?
So i tried:


root@dm800se:/var/volatile/tmp# opkg --nodeps install dreamdts_1.0-r8_mipsel.ipk
Installing dreamdts (1.0-r8) to root...
Configuring dreamdts.


Enigma doesn't start any more after doing this. Tried with installing libdca0_0.0.5-r2_mipsel.ipk then it installs and Enigma starts but again.. there's no working dts downmix! :(
I guess this problem is related to tpm thinggy in pli or maybe caused by some incompatibilities between the genuine plugin and pli system. Similar hack works for me perfectly using other images i tried, like Dream-Elite-3-0-dm800se-r(010)-ramiMAHER.nfi, DOMICA-image-dm800-2012-02-11
Genuine plugin just tells "Cant connect to server. Please check your network!" when using OpenPli image. BTW, the network actually works without any problems, network tests fully passed. When using other mentioned images, Genuine plugin has no problems connecting and generating the code and therefore dts downmix function does work as well. If we find out what makes Genuine plugin to fail in Pli and not to fail in some other images then we can probabily solve this.

rossi2000
13-02-2012, 09:22 AM
just install the following file using opkg install < filename>

//jb


you can always just do "opkg install openvpn" in telnet which will do all that for you

satpolare
14-02-2012, 08:28 PM
you can always just do "opkg install openvpn" in telnet which will do all that for you

I tried that, it would not install correctly for me.

//s

dizzynonun
19-02-2012, 11:01 PM
The drivers changed again as of 02/16, so change this to be able to use software update without problems:

Use an FTP application (DCC E2 is recommended) to edit this file on the box:

/usr/lib/opkg/status

just change the phrase;

"Version: 2.6.18-7.4-dm800se-20111109-revert-20110902-r6.3"

with:

"Version: 2.6.18-7.4-dm800se-20120216-r6.3"

and save.

If you are using software update after a fresh install of the image provided in the first post; first thing: restart the device after making changes, then do software update and then restart the device twice. It will be all done.

secaspider
19-02-2012, 11:11 PM
Thank you, for the information. I tried and all is ok :)

rossi2000
20-02-2012, 07:31 AM
I tried that, it would not install correctly for me.

//s

then you need to do
opkg update
then
opkg install openvpn

satpolare
20-02-2012, 07:10 PM
Tried that as well, it seems that the TUN driver is missing from the image.

it is enough to first install the "kernel-module-tun_2.6.18-r42.0_dm800se.ipk"

Then install openvpn as usual

/s



then you need to do
opkg update
then
opkg install openvpn

rossi2000
21-02-2012, 07:51 AM
ahh, the dm800se defconfig in the source doenst have tun enabled, its needs enabling.

2pac76
24-02-2012, 07:03 PM
hello

why sherlock plugin doesnt work i mean the Dr watson bitrateviewer which is build in sherlock?

gjstroom
24-02-2012, 07:17 PM
New image 2012-02-22, see start post.
-OpenWebInterface is now default on PLi images, it also stays at port 80 when updating.
-Drivers are 2012-02-16, but still use bcm7405.ko from the 2011-11-09 driver set.
-No more default cam installed, choose the one you like from the plugins/download menu.

binsat
25-02-2012, 07:57 AM
very strange.. now when pressing "info" button you get channel listing. have they really implemented that silly change or something f#xored up? keymap changing doesnt help to resolve this, so flashed older version back.. not that it bothers me, but noticed that no cccam in default setup as well like we used to see in previous versions.

gjstroom
25-02-2012, 10:45 AM
very strange.. now when pressing "info" button you get channel listing. have they really implemented that silly change or something f#xored up? keymap changing doesnt help to resolve this, so flashed older version back.. not that it bothers me, but noticed that no cccam in default setup as well like we used to see in previous versions.
I don't see your point, the info function works like before.
There's no longer a cam installed by default, it's also described in the text @topic start.

binsat
25-02-2012, 11:24 AM
I don't see your point, the info function works like before.
There's no longer a cam installed by default, it's also described in the text @topic start.
well maybe something went wrong when flashing or with the download. will try reflashing later. sry about. as your replacing clone stuff anyway maybe it's a good idea to include cccam like it was previously? if it's too difficult, then no problem.

gjstroom
25-02-2012, 11:41 AM
well maybe something went wrong when flashing or with the download. will try reflashing later. sry about. as your replacing clone stuff anyway maybe it's a good idea to include cccam like it was previously? if it's too difficult, then no problem.
You can install CCcam with 2 clicks, just go to the plugins menu, press the green button (download plugins), goto softcams and install the cam you like.
I removed it from the image, because I switched to Oscam myself and the default OpenPLi image hasn't one installed by default also.

binsat
25-02-2012, 11:58 AM
ok then. btw, does dts downmix works for you (or someone else who try)? i couldn't get it to work using these guidelines you posted earlier. obviously missing something here..

gjstroom
25-02-2012, 12:22 PM
I don't use dts downmixing only pass through and that also doesn't work proper on PLi, much hiccups.
The part I wrote some pages back was not about down mixing (I misunderstood the previous questions)...
When I find some time I have a look at it again. I should be possible if other images can do it.

binsat
25-02-2012, 12:29 PM
clear. thank you for your reply! yes, dts downmix is functioning very well with other images.. i believe many ppl really hope that someone finds out the way how to make it work on pli as well.

secaspider
25-02-2012, 05:34 PM
Sorry I did edit Secaspiders message instead of doing a reply....

I lost some setting in the control as well. I updated the image doing the trick of the driver for the tunner but now the timeshift doesn´t work. How to fix it?

secaspider
25-02-2012, 06:16 PM
I changed the keymap to get the 3 row remote working like crille4 says.
The keymap is part of the Enigma2 and this module is updated very frequent, so it overwrites the keymap with a default one.I didn´t rememer the bug with the keymap. I will try to rewrite the content of the file, to getthe timeshift back and working. Cheers.

gjstroom
26-02-2012, 09:42 AM
I lost some setting in the control as well. I updated the image doing the trick of the driver for the tunner but now the timeshift doesn´t work. How to fix it?
If you can tell me which controls, I can take a look.
I do patch the /usr/share/enigma2/keymap.xml file for the 3 row remote, with every update you get a standard keymap.xml because it's part of the enigma module. This will kill all 3 row functions (like pause play stop).

secaspider
26-02-2012, 07:08 PM
If you can tell me which controls, I can take a look.
I do patch the /usr/share/enigma2/keymap.xml file for the 3 row remote, with every update you get a standard keymap.xml because it's part of the enigma module. This will kill all 3 row functions (like pause play stop).I rewrited the new file with the old one of one of your last launches, and all came back to normal. Thank you gj.

crossfader
27-02-2012, 06:59 AM
Device manager not working properly,in tspanel and also original from openpli feed.Always when I go to device manager I have green screen.I back to my old backup.Regards.

gjstroom
27-02-2012, 09:07 PM
Device manager not working properly,in tspanel and also original from openpli feed.Always when I go to device manager I have green screen.I back to my old backup.Regards.
Please explain 'Device manager' ?

Benkurd
27-02-2012, 10:28 PM
Please explain 'Device manager' ?

i just checked on pli from 27.02.2012

In ts panel system tool Device manager will have green screen

i thinks MF will be Abel to fix

Haroon
28-02-2012, 12:15 PM
I have noticed that the latest image with tweaked drivers has one of the worst PQ, since i switched over to pli a year ago.

Back to december image.

IAmATeaf
29-02-2012, 09:27 AM
I have noticed that the latest image with tweaked drivers has one of the worst PQ, since i switched over to pli a year ago.

Back to december image.

I've not noticed a difference, what December image are you using?

Haroon
29-02-2012, 11:26 AM
what December image are you using?


OpenPLi-2.1-beta-dm800se-20111212-sim210-ssl84b by gjstroom.

IAmATeaf
29-02-2012, 03:28 PM
I also meant to ask, why does this image not have a shutdown option in the menus, means I have to go into DCC and issue the shutdown command from there?

crossfader
29-02-2012, 05:43 PM
I noticed some of images for clones on this forum which are posted and uploaded are not fully tested,but this is all free and anyway great work,with our suggestion the magician image makers for clones can make it better next time.So we need wait for next edition.Thanks and regards.

gjstroom
29-02-2012, 06:49 PM
i just checked on pli from 27.02.2012
In ts panel system tool Device manager will have green screen
i thinks MF will be Abel to fix
Ok, doesn't look like a PLi issue or something wrong with my latest image to me.

gjstroom
29-02-2012, 06:51 PM
I also meant to ask, why does this image not have a shutdown option in the menus, means I have to go into DCC and issue the shutdown command from there?
It's normal in the OpenPLi 800SE version, it only has deep standby.

gjstroom
29-02-2012, 06:59 PM
I noticed some of images for clones on this forum which are posted and uploaded are not fully tested,but this is all free and anyway great work,with our suggestion the magician image makers for clones can make it better next time.So we need wait for next edition.Thanks and regards.
It is tested, I only make PLi images from source and only modify some small parts to make it work on a clone. It's basic just like the original image.
If you like images with all kinds of additional stuff, there lot of those on this forum.
I'm not a fan of spinners, custom bootscreens and BA leftovers.

IAmATeaf
29-02-2012, 08:38 PM
It is tested, I only make PLi images from source and only modify some small parts to make it work on a clone. It's basic just like the original image.
If you like images with all kinds of additional stuff, there lot of those on this forum.
I'm not a fan of spinners, custom bootscreens and BA leftovers.

I'm with gjstroom on this, I too prefer an image with as little in it as possible, I then have the choice as to what I want to install, also means that you end up with flash that actually has a reasonable amount of free space.

fortum
29-02-2012, 09:59 PM
Hello mates- does this image works with Sunray sr4- got it yesteday and now need good and stable image like OpenPli..Megaupload is close and liks Openpli for Sunray sr4 is dead.
BTW thanks gjstroom for hard work-you are the best

mfaraj57
01-03-2012, 05:06 AM
i just checked on pli from 27.02.2012

In ts panel system tool Device manager will have green screen

i thinks MF will be Abel to fix
TSpanel is programmed for all images and TSpanel device manager not typically stable and enigma2 dependent and add to this the openpli has different architecture
i feel that openpli the least image needs TSpanel because the most two important things in TSpanel(addons and cams) are available in the strong openpli server

kargo123
01-03-2012, 07:19 AM
Yes it will work on the sr4 youll just need to manually configure scanning/and LNB parameters, if wifi does not work there are some fixes/driver under sim2 tools.

biohazard
01-03-2012, 08:50 AM
Once i successfully flash this image, is it safe to run an online update?

kargo123
01-03-2012, 09:35 AM
Once i successfully flash this image, is it safe to run an online update?

I would not mixed results some get away with it some dont, some older pli version allowed updates i would not do it on this version.

IAmATeaf
01-03-2012, 10:17 AM
@gjstroom or anybody else that can help, I'm investigating a problem with CrossEPG where randomly after a timed update, in my case at 04:00am the CrossEPG location randomly gets reset (by randomly I mean that it will be correctly set to USB for a couple of days, maybe even a week then the next evening it'll revert) to use the Internal Flash whereas prior to the update it was set to use the USB Flash Drive. When this occurs the CrossEPG EPG location setting doesn't even pick up my internal HDD or the USB Flash Drive, reboot enigma2 and CrossEPG can once again see the USB and HDD.

I have both the USB and HDD auto mounted, so no entries in fstab so I'm wondering what might cause CrossEPG to think that the USB and HDD are no longer there. The really odd thing is that the actual update at 04:00am occurs and uses the USB but it's after the update that the config for CrossEPG and the location for the EPG data file gets reset to use the Internal Flash.

I'm using CrossEPG svn300, as available vis Plugins download, I've looked on the gits site and can see that there is a version gits 274 and I've also found gits 284 thanks to the help of a user on another forum, so am going to try them but to me it looks like some sort of problem that might be image based.

One last thing I'm going to try is to add entries for the USB and HDD in /etc/fstab using their UUID to see if that makes a difference.

I'd be grateful for any help or advice.

Bassie
01-03-2012, 01:00 PM
Try epgimporter (its for PLi meant) from the feed its lighter and faster then big memory consuming crossepg...cross uses rytec epg importer sources also.

And yea sort your usb devices make them sticky by UUID, last week PLi developers did screw arround alot with usb mounting...

IAmATeaf
01-03-2012, 02:22 PM
Try epgimporter (its for PLi meant) from the feed its lighter and faster then big memory consuming crossepg...cross uses rytec epg importer sources also.

And yea sort your usb devices make them sticky by UUID, last week PLi developers did screw arround alot with usb mounting...

I was using xmltvimporter but I'm investigating a problem that people have reported on another forum so have switched to use CrossEPG to see if I can get to the bottom of the problem. I'll definitely get fstab updated to do a mount using the UUID, going to do that tonight.

There's also a suggestion that this is only happening on OpenPLi based images.

crossfader
01-03-2012, 08:08 PM
It is tested, I only make PLi images from source and only modify some small parts to make it work on a clone. It's basic just like the original image.
If you like images with all kinds of additional stuff, there lot of those on this forum.
I'm not a fan of spinners, custom bootscreens and BA leftovers.

You dont understand me,I respect your great job,I already using your openpli mod from january and all working perfect,device manager also no problem,I only report that in this new mod from 22 february device manager not working,thats why I said not all images are fully tested.But this is not a problem,this is a hobby,we need to report if something not working,and then next time mayby will be fixed.

And this is best forum with patched images for clones.Best regards.

IAmATeaf
02-03-2012, 10:50 AM
For the Crossepg problem I've come up with a simple and easy workaround, create a symlink for /usr/crossepg/data to point to either /media/hdd/crossepg or /media/usb/crossepg then set Crossepg to download to Internal Flash.

Should work, but I've not had the chance to test it yet.

phano
06-03-2012, 07:22 PM
For the Crossepg problem I've come up with a simple and easy workaround, create a symlink for /usr/crossepg/data to point to either /media/hdd/crossepg or /media/usb/crossepg then set Crossepg to download to Internal Flash.

Should work, but I've not had the chance to test it yet.

I am having this issue with this image for the 800se.
Also I am having the same issue with this version of gjstrooms pli image, on my dm800hd.
So I have disabled cross epg for now on both boxes, and will manually download the data to my pen drive, and wait and see if there is a fix for this.
Because I have another box that has a damaged flash memory caused by a epg issue.
I have tried every program I know to sort it out but I can not get rid of the bad sectors. It still works with 1mb of space left

bibic
06-03-2012, 08:37 PM
With this image I have one big problem; when restart my box, network not start automatic. Always must to start manual. How start automatic network?
Thanks.

IAmATeaf
09-03-2012, 08:57 PM
Has anybody else noticed that sometimes when restarting enigma from the setup menu the box sort of gets stuck on the OpenPLi initial boot screen. I then have to use DCC to issue init 0 before then restarting the box. But this only happens say 1 in 3 restarts of enigma.

IAmATeaf
09-03-2012, 09:00 PM
With this image I have one big problem; when restart my box, network not start automatic. Always must to start manual. How start automatic network?
Thanks.

I don't have this problem, how is your network setup? Mine is set to DHCP

bibic
11-03-2012, 08:54 AM
I use always static IP. I not use DHCP. And my network not start automatic whet restart my box. I have this problem only with OpenPLI image.

IAmATeaf
11-03-2012, 05:04 PM
I use always static IP. I not use DHCP. And my network not start automatic whet restart my box. I have this problem only with OpenPLI image.

Not tried this config myself, I have my box setup for DHCP but then have my router setup so that the dreambox is always given the same IP address, this way even on **STOP** mode the dreambox always gets the same IP address.

I do have a problem in that my USB flash drive doesn't get detected and auto-mounted on a reboot, have to unplug the USB and plug it back in again for it to be detected.

gjstroom
11-03-2012, 05:38 PM
I do have a problem in that my USB flash drive doesn't get detected and auto-mounted on a reboot, have to unplug the USB and plug it back in again for it to be detected.
I don't have this problem on both 800SE and 800SE SR4, maybe some trouble with your usb stick ?
I formatted mine on a Ubuntu machine and also made sure it doesn't filesystem checking after x mounts.
tune2fs -c0 /dev/sdx1

IAmATeaf
11-03-2012, 09:34 PM
I don't have this problem on both 800SE and 800SE SR4, maybe some trouble with your usb stick ?
I formatted mine on a Ubuntu machine and also made sure it doesn't filesystem checking after x mounts.
tune2fs -c0 /dev/sdx1

I got the impression that the stick wasn't even being detected until it was unplugged and re-plugged but I need to do some investigating first.

Since I have you attention, I've seen images with the latest version of enigma2, will there be an OpenPLi image with this or are there likely to be problems?

secaspider
11-03-2012, 10:21 PM
I have the same problems in all openpli images and derivates.Koala DreamUk etc.... I have to unplug an plug again to get the box recognized the usb flashdisk

cokesux
11-03-2012, 11:02 PM
Since I have you attention, I've seen images with the latest version of enigma2, will there be an OpenPLi image with this or are there likely to be problems?
If you mean will OpenPLi ever use DMM's closed source enigma2 binary, it would seem highly unlikely. Never say never, but perhaps 99.9993%..... ;)

--

IAmATeaf
12-03-2012, 03:27 PM
If you mean will OpenPLi ever use DMM's closed source enigma2 binary, it would seem highly unlikely. Never say never, but perhaps 99.9993%..... ;)

--

No sorry, what I meant is that I've seen images with enigma2 3.2.1 so was wondering that would ever come to these OpenPLi images?

binsat
12-03-2012, 04:13 PM
may i ask what are advantages of enigma2 v3.2.1? everyone is desperately talking about all over the forums but i wonder what it actually gives to you if compared, for example to openpli customized enigma2? if it's a closed source crap, then you basically loose all the openpli main features. so it's absolutely pointless..

cokesux
12-03-2012, 04:24 PM
Enigma2 3.x is DMM's closed source crap, hence my previous post... ;)

--

MrAxan
15-03-2012, 08:27 AM
Have been testing this image and many others, but i have some problem. My box is freezing sometime once when its on and sometime in standby. I have the lastest drivers and starting to freak out. Please help people :(

IAmATeaf
15-03-2012, 10:34 AM
Have been testing this image and many others, but i have some problem. My box is freezing sometime once when its on and sometime in standby. I have the lastest drivers and starting to freak out. Please help people :(

Did you do an online update? If so then this may be the cause of the problems.

MrAxan
15-03-2012, 10:35 AM
Did you do an online update? If so then this may be the cause of the problems.

No online update, only images from this forum.

gjstroom
15-03-2012, 08:35 PM
Have been testing this image and many others, but i have some problem. My box is freezing sometime once when its on and sometime in standby. I have the lastest drivers and starting to freak out. Please help people :(
Check if you have ipv6 enabled, but if you haven't done online updates that can't be the case...
telnet to your box and enter ifconfig and see if your see some ipv6 lines.
[edit] oops this was a problem with the 800 and not the 800se...

crossfader
16-03-2012, 07:55 AM
But before online update we need to change manually the date of dvb modules i our dreambox to 20120216-did Iam right?I done that and I done online update without problem(and without updating dvb modules drivers).Iam using open pli by gjstroom from 28.01.2012.Regards.

gjstroom
17-03-2012, 09:33 AM
But before online update we need to change manually the date of dvb modules i our dreambox to 20120216-did Iam right?I done that and I done online update without problem(and without updating dvb modules drivers).Iam using open pli by gjstroom from 28.01.2012.Regards.
Yep, or use my newer image...

spikes
18-03-2012, 09:30 AM
Can I use this image also for the sr4?

maoui
18-03-2012, 10:09 AM
yes of course

florinlin
18-03-2012, 01:10 PM
I use this image, I'm very pleased, it's very fast and stabile, but I have a little complain: mediaplayer from image have a bug, in fact you cannot put "pause" when you watch a movie. Can you recommend me a mediaplayer plugin ?

IAmATeaf
18-03-2012, 05:32 PM
I use this image, I'm very pleased, it's very fast and stabile, but I have a little complain: mediaplayer from image have a bug, in fact you cannot put "pause" when you watch a movie. Can you recommend me a mediaplayer plugin ?

I've just tried and can pause and resume using the yellow button.

florinlin
18-03-2012, 07:00 PM
I've just tried and can pause and resume using the yellow button.

with yellow button I can select ONLY the audio track and subtitle...

cokesux
18-03-2012, 07:14 PM
Does your remote have 2 or 3 rows of buttons across the bottom? I believe gj tweaked the keymap in his se images to work w/ the 3 row remote, which has a discreet play/pause key, rather than using the yellow button of the 2 row remote.

--

florinlin
19-03-2012, 06:25 PM
Does your remote have 2 or 3 rows of buttons across the bottom? I believe gj tweaked the keymap in his se images to work w/ the 3 row remote, which has a discreet play/pause key, rather than using the yellow button of the 2 row remote.

--

For sure it's a problem with mediaplayer. I checked all the buttons from remote control: no one works for "pause" when I watch a movie. Can you recommend me another player (plugin for openpli) ?

cokesux
19-03-2012, 07:38 PM
OpenPLi places more emphasis on using the PVR function (under the video button, you should be able to browse to files anywhere on the box), rather than using MediaPlayer.

--

Ps. You never answered the question. I'd expect a 2 row remote to not work correctly with this image's keymap...

IAmATeaf
19-03-2012, 08:19 PM
OpenPLi places more emphasis on using the PVR function (under the video button, you should be able to browse to files anywhere on the box), rather than using MediaPlayer.

--

Ps. You never answered the question. I'd expect a 2 row remote to not work correctly with this image's keymap...

I'm using an older silver 2 row button remote and in mediaplayer I have no problems. Is he talking about the mediaplayer you get when you press the Video button isn't he?

cokesux
19-03-2012, 09:04 PM
I don't know, MediaPlayer is a plugin seperate from the built in PVR (video button).

--

crille4
21-03-2012, 08:21 AM
install multi quick button and assaign buttons self, but cokesux is right keymap is change to 3 row remote, a software update revert back, but maby more things happen then

florinlin
21-03-2012, 01:49 PM
Thank you very much guys. With multi quick button I solved the problem.

IAmATeaf
23-03-2012, 02:01 PM
I'm still having problems with mu USB stick. If I restart the box then my USB stick doesn't get picked and therefore doesn't mount. I then have to unplug the stick and plug it back in before the stick gets detected and then mounted.

Nothing major just an annoyance :)

phano
23-03-2012, 06:05 PM
Hi mate, I was having a similar issue, whenever I rebooted the box, after the box restarted It would show no EPG, I never removed the stick, I just download it
again. But for some reason it restarts without any problems at all now (nothing I did) Is it worth you trying in one of the other ports for the stick?
I am still worried about the crossEPG defaulting to the flash memory, so I have the auto download disabled, and do it manually for now (no big deal really)
I know you posted a workaround on this. How is that working out?
I know some people say that pli is a bit basic, not sure why, I also use gjstooms 800hd version on 2 other boxes, and for me he does a great job, without adding
stuff you don't need. So thanks to him!!

spikes
23-03-2012, 06:28 PM
Is there also an image for the sunray tuner?
I want to use dvb-s dvb-c (ziggo) and dvb-t netherlands also?
I use diseq for dvb-s 4 lnb's.

sorry edited your message instead of replying.

kargo123
23-03-2012, 06:48 PM
Is there also an image for the sunray tuner?
I want to use dvb-s dvb-c (ziggo) and dvb-t netherlands also?
I use diseq for dvb-s 4 lnb's.

regards Spikes

Lots of sr4 images here

http://www.dreamoem.com/forumdisplay.php?35-SIM2-images-for-Sunray4-SR4

gjstroom
23-03-2012, 08:51 PM
Is there also an image for the sunray tuner?
I want to use dvb-s dvb-c (ziggo) and dvb-t netherlands also?
I use diseq for dvb-s 4 lnb's.

It works on a 800SE SR4 as well, pm me for the Ziggo settings.

spikes
23-03-2012, 10:22 PM
The following errors occurred with your submission

gjstroom has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

gjstroom
23-03-2012, 10:58 PM
The following errors occurred with your submission
gjstroom has exceeded their stored private messages quota and cannot accept further messages until they clear some space.
Oops deleted some messages !

spikes
24-03-2012, 08:53 AM
Thanks working now, see pm.

crossfader
24-03-2012, 04:11 PM
This image is the best,still is a problem with device manager but my pendrive and hdd are automaticly mounted and work perfect,crossepg no problem always on usb,very stable image and small for flash.PLI HD skin best for me.

Keep doing this good job mr.gjstroom
Regards.

firsyah
24-03-2012, 05:57 PM
what plug in should i download if i want to play media with .mkv .mov etc??

IAmATeaf
24-03-2012, 07:46 PM
Hi mate, I was having a similar issue, whenever I rebooted the box, after the box restarted It would show no EPG, I never removed the stick, I just download it
again. But for some reason it restarts without any problems at all now (nothing I did) Is it worth you trying in one of the other ports for the stick?
I am still worried about the crossEPG defaulting to the flash memory, so I have the auto download disabled, and do it manually for now (no big deal really)
I know you posted a workaround on this. How is that working out?
I know some people say that pli is a bit basic, not sure why, I also use gjstooms 800hd version on 2 other boxes, and for me he does a great job, without adding
stuff you don't need. So thanks to him!!

Ah, yes, I forgot I had posted about this.

I did some investigation of this issue and discovered that it was the actual Configure screen that you use on the box to check what the location is set to was what was causing the problem. I updated the file crossepg_setup.py and put some debug statements that wrote to a log file and discovered that the call:

os.system

would just randomly fail. What the Configure screen was doing was every time you ran it would get a list of mounted partitions and then perform a test to see if the partitions were read/write. So for each partition it would create a file on the partition and then test to see if the file was there. When the os.system call failed it would incorrectly deduce that the partition wasn't writeable. This resulted in the partition not being listed and it would then default to use the Internal Flash.

I posted about this on the OpenPLi forums where I was told that this was a known issue, nobody really knew why the call failed, it's suspected that it fails with an Out of Memory type error. So with the help of the OpenPLi forums I recoded the section in the .py file that determines if the partition is writeable.

I've been using the revised file and so far it's been something like 10+ days and it's still set to USB for me whereas before it would revert after 2 days. I should also add that it you set it and then never ever went back into the Configure screen then in theory the setting would never change.

I've attached the file in case you want to try it, copy the file to /usr/lib/enigma2/python/Plugins/SystemPlugins/CrossEPG and restart enigma2

In case anybody is interested the lines with # at the start is the original code. The 'touch' command would fail, the code below is the revised code:



# def isMountedInRW(self, path):
# testfile = path + "/tmp-rw-test"
# os.system("touch " + testfile)
# if os.path.exists(testfile):
# os.system("rm -f " + testfile)
# return True
# return False

def isMountedInRW(self, path):
testfile = os.path.join(path, "tmp-rw-test")
try:
open(testfile, "wb").close()
os.unlink(testfile)
except:
return False
return True

cokesux
25-03-2012, 01:15 AM
Just a reminder, xmltvimport has been, is, and most likely in the future... will be tightly integrated into the OpenPLi images. Possibly why many people don't going out of their way to troubleshoot crossepg on openPLi issues... ;)

--

IAmATeaf
25-03-2012, 07:49 PM
Just a reminder, xmltvimport has been, is, and most likely in the future... will be tightly integrated into the OpenPLi images. Possibly why many people don't going out of their way to troubleshoot crossepg on openPLi issues... ;)

--

I used to use xmltv but switched over to crossepg to help people having problems with crossepg on another forum. :)

gjstroom
02-04-2012, 08:38 PM
New image 2012-04-02, see start post.
Some features:
-VideoWizard screen automatically fit to screen
-New screen when rebooting/restarting/standby
-New Mediasink, this should enable dts downmix on 800se and 500hd. It only works on the 500hd for now.
-I didn't update to latest drivers, because the bcm740*.ko from the 2011-11-09 driver set is needed with current SSL. All changes are in the bcm driver.

crossfader
02-04-2012, 08:38 PM
Hi.I just checked 1st post and we have update from gjstroom but whats already new on it?I upadting openpli on my sr4 from time to time,and I also have up to date image.Thanks and regards.

gjstroom
02-04-2012, 08:42 PM
Hi.I just checked 1st post and we have update from gjstroom but whats already new on it?I upadting openpli on my sr4 from time to time,and I also have up to date image.Thanks and regards.
You're fast, look 2 posts up !
You can always check this: http://openpli.git.sourceforge.net/git/gitweb-index.cgi

crossfader
02-04-2012, 08:58 PM
You're fast, look 2 posts up !
You can always check this: http://openpli.git.sourceforge.net/git/gitweb-index.cgi

Hi gjstroom-Yes,I also checking here http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=shortlog

Best regards.

ggeh
06-04-2012, 10:36 AM
Hello and thank you for this image.
This is the best, just ahead of the Dream Elite and Nemesis.
1st: loading in emu
First: in loading image
First: in fontion multimedia
First: in speed
1st: Hardwar in connection (wifi, HDD)

Try it, you'll see.


Bonjour et merci beaucoup pour cette image.
C'est la meilleur, juste devant celle de dream elite et nemesis.
1er : en chargement emu
1er : en chargement image
1er : en fontion multimedia
1er : en rapidité
1er : en compatibilité materiel (wifi, hdd)

Essayez la, vous verez.

merci beaucoup Gjstroom :D

binsat
09-04-2012, 02:21 AM
decent image, it may become the best one if they manage to fix some problems like
infamous problem with missing tun module for openvpn.. + still no dts downmix for dm800se.


root@dm800se:~# opkg install openvpn
Installing openvpn (2.1.0-r2.0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/openvpn_2.1.0-r2.0_mipsel.ipk.
openvpn: unsatisfied recommendation for kernel-module-tun




root@dm800se:~# opkg list | grep kernel-module-tun
root@dm800se:~#<nope found>
makes me wonder is that s#itty missing tun really so hard to fix for them? and dont tell we should search for misssing kernel modules from 3rd party compilations..

gjstroom
09-04-2012, 09:08 AM
decent image, it may become the best one if they manage to fix some problems like
infamous problem with missing tun module for openvpn.. + still no dts downmix for dm800se.
makes me wonder is that s#itty missing tun really so hard to fix for them? and dont tell we should search for misssing kernel modules from 3rd party compilations..
Looks like it works on a DM800:
root@dm800:~# opkg install openvpn
Installing openvpn (2.1.0-r2.0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800/mipsel/openvpn_2.1.0-r2.0_mipsel.ipk.
Installing liblzo1 (1.08-r15) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800/mipsel/liblzo1_1.08-r15_mipsel.ipk.
Installing kernel-module-tun (2.6.18-r6+git5+ac6cc9511a5f70eaa584c63fc5c3de33cae1d0e7.1 ) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800/dm800/kernel-module-tun_2.6.18- 6+git5+ac6cc9511a5f70eaa584c63fc5c3de33cae1d0e7.1_ dm800.ipk.
Configuring liblzo1.
Configuring kernel-module-tun.
Configuring openvpn.

I think that's not a hard one to fix, I will try to compile a kernel with TUN module support.
dm800: CONFIG_TUN=m
dm800se: # CONFIG_TUN is not set

I still wonder why those PLi guys keep different kernel configs, also the dm800 has ipv6 module support (which I strip), the dm800se has not...

Maybe this attachment solves the problem...
743

Bassie
09-04-2012, 01:30 PM
The problem is not only tun missing but also the module doesnt autoload when installed, have to start it manually in a script b4 openvpn is loaded.

Workarround like this :

ln -s /etc/init.d/tun /etc/rc3.d/S22tun

ln -s /etc/init.d/openvpn /etc/rc3.d/S23openvpn

Did solve the autostart problem.

Openvpn and liblzo on the pli feed is outdated, i attach newer versions.

745
744

Tom0000
11-04-2012, 07:42 AM
Bassie,
This is a work for enigma2 gui. If enigma is not supporting it, the modification for init.d should be manual as long as installing the module is manual too. (opkg)

fastek
12-04-2012, 02:59 AM
dear gjstroom,

can this image install into HDD not internal flash?

cmargach
12-04-2012, 08:36 AM
hi try the flash expander plugin in ts panle.

fastek
12-04-2012, 02:33 PM
hi try the flash expander plugin in ts panle.

tq i will try...

angrg
13-04-2012, 11:16 AM
Did anyone get this image to work with 800SE SR4 (3in1) on DVB-t as well? Please reply or PM me with config details.

gjstroom
13-04-2012, 03:25 PM
Did anyone get this image to work with 800SE SR4 (3in1) on DVB-t as well? Please reply or PM me with config details.
Search the forum, how to configure the different dvb flavors. You need to configure a tuner and edit your satellites.xml.
The image does work on an SR4 !

rossi2000
17-04-2012, 07:34 PM
The problem is not only tun missing but also the module doesnt autoload when installed, have to start it manually in a script b4 openvpn is loaded.

Workarround like this :

ln -s /etc/init.d/tun /etc/rc3.d/S22tun

ln -s /etc/init.d/openvpn /etc/rc3.d/S23openvpn

Did solve the autostart problem.

Openvpn and liblzo on the pli feed is outdated, i attach newer versions.

745
744

the openvpn file in /etc/init.d/ contains the command to load the tun.
modprobe tun >/dev/null 2>&1 || true

from looking at other images openvpn needs to be linked into rc1.d - rc6.d but not rcS.d

dizzynonun
18-04-2012, 08:03 PM
is there a plugin for this image which zaps back to a channel after given time. i couldn't find rezapp for this image. maybe there is another one which does the same thing.

rossi2000
18-04-2012, 08:21 PM
wget -q -O - http://127.0.0.1/web/zap?sRef=1:0:19:1B1D:802:2:11A0000:0:0:0

for eg. will change the channel to BBC1.

setup a cron job for it.

crille4
19-04-2012, 07:21 AM
dont the timer do same thing ? pushing zero button rezapp but manual

wget -q -O - http://127.0.0.1/web/zap?sRef=1:0:19:1B1D:802:2:11A0000:0:0:0

for eg. will change the channel to BBC1.

setup a cron job for it.

dizzynonun
23-04-2012, 09:50 AM
do not auto update as of today. something's changed and it's giving a tuner error. no, it's not the dvb modules, something else i couldn't find out about.

Bassie
23-04-2012, 11:29 AM
For the Dreambox 800se they did add a new driver on the feed 21 april.



Openembedded git [pieterg] dreambox drivers: 20120322 update


Unfortunally our ssl cannot handle these newer drivers.

Check the GIT for updates, to fix overwrite the current driver with version (20111109).

Next time edit opkg status with the newer driver date so this wont happen again.

Also possible is to opkg hold dreambox-dvb-modules.

If you have a dm800 its indeed another problem not driver related...

dizzynonun
23-04-2012, 03:12 PM
For the Dreambox 800se they did add a new driver on the feed 21 april.



Openembedded git [pieterg] dreambox drivers: 20120322 update


Unfortunally our ssl cannot handle these newer drivers.

Check the GIT for updates, to fix overwrite the current driver with version (20111109).

Next time edit opkg status with the newer driver date so this wont happen again.

Also possible is to opkg hold dreambox-dvb-modules.

If you have a dm800 its indeed another problem not driver related...

thank you. well it's 800se and I was checking the latest version of the dvb-modules as updating the openpli feeds through TS Panel every time before I use software update, but it is still showing that 20120216 is the latest. How come TS Panel shows wrong version even after updating the Openpli feeds with no error? Do you know an RSS feed which directly shows the latest version of dvb-modules?

anyway, I'm changing opkg status file now. thanks for the info.

dizzynonun
24-04-2012, 10:24 AM
another problem:

I'm getting the following error when opening plugins menu


Some plugins are not available:
Extensions/IMDb (No module named html)

I tried to uninstall and reinstall imdb plugin.
I also tried sending the following telnet command:


opkg install python-html

it showed:


Package python-html (2.6.6-ml12.6) installed in root is up to date.

but i still get the same error and IMDb plugin doesn't appear in the list. Any help would be appreciated.

Bassie
24-04-2012, 01:19 PM
Goto /usr/lib/enigma2/python/Plugins/Extensions/IMDb/ and manualy delete the folder, try to install thru the PLi feed again, it works overhere.

"python-html" package is only needed to run openwebif.

dizzynonun
24-04-2012, 04:00 PM
Goto /usr/lib/enigma2/python/Plugins/Extensions/IMDb/ and manualy delete the folder, try to install thru the PLi feed again, it works overhere.

"python-html" package is only needed to run openwebif.

did that and still getting the same error. What is this "module named html" how can i manually install this module?

Bassie
24-04-2012, 04:40 PM
I have no idea what module this is, sounds more a problem with the plugin itself then PLi lacking some modulles installed.

Did you get it from the PLi feed or TS-panel.?

crossfader
24-04-2012, 08:36 PM
Best way to check what will updated is put command on telnet:

opkg update && opkg list|grep "dreambox-dvb-modules "

And then on the bottom is wrote on what date are dvb-modules will be upadted.

Regards.

dizzynonun
25-04-2012, 10:12 AM
I have no idea what module this is, sounds more a problem with the plugin itself then PLi lacking some modulles installed.

Did you get it from the PLi feed or TS-panel.?

I tried both. Indeed, both are targeting the same source (TS Panel added OpenPli feeds in its latest version). I will wait till the plugin gets updated. Thank you by the way.

gjstroom
25-04-2012, 07:59 PM
Take care when doing a online update, PLi updated their drivers to 20120322 !

Now on the box:
opkg list_installed |grep dreambox-dvb-modules
dreambox-dvb-modules - 2.6.18-7.4-dm800se-20120216-r6.3

New:
opkg list |grep dreambox-dvb-modules
dreambox-dvb-modules - 2.6.18-7.4-dm800se-20120322-r6.3 - Hardware drivers for Dreambox

You can trick the update process by editting /usr/lib/opkg/status

search for these lines:
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20120216-r6.3

change it to:
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20120322-r6.3

wottyy
27-04-2012, 08:18 PM
thanks mate it works

fjorger
06-05-2012, 10:45 PM
Hello,

I just want everyone to know that this is one of the very few images that will stream ZON (TV cabo) Hispasat (or even cable) MPEG2 channels 100%.

The majority of images (including all the latest ones) do fail.
And don't tell me it's a VLC version problem, because this OPENPli image streams to every single version of VLC (I'm using the lastest).

So unless the problem is fixed on other images I'm going to stick with OPENPli.

Best regards,

fjorger.

PS: Just a Hint for those trying to figure out what's causing MPEG2 channels stream fail. I think this is a WEBINTERFACE related problem, because one the OPENPli images I used (that didn't had OPENWebif) but had WEBINTERFACE instead, also failed to stream MPEG2 Channels. All versions (on all clones types) that use OPENWebif do good :) . And to prove this I will (later on) try the lastest BlackHole (that has OPENWebif).

Bassie
07-05-2012, 02:26 AM
This is caused course some Polish (cyfra/cyfrowy), Spanish (TV-Cabo) and Portugese providers on Hotbird and Hispasat are using shared PMT in channels.

The problem is not image related, and also no vlc version problem you are right about that :)

"PS: Just a Hint for those trying to figure out what's causing MPEG2 channels stream fail. I think this is a WEBINTERFACE related problem"

You are again right and its fixed since 25 march ( Enable streaming of channels with shared PMT) after a polish and a portugese guy did bug-report this problem in the Openwebif thread from PLi board.

So as long as you are using Openwebif on images that support this webif you have no problems streaming channels with shared PMT, nothing wierd about that :)

When using the default webif from dmm this stream problem happens, to make it work you have to report to dream developers of the webif so they can fix it.

gjstroom
07-05-2012, 09:20 PM
New image in start post: OpenPLi-2.1-beta-dm800se-20120507-sim210-ssl84b !
PLi moved to driver version 0322, with this version you can do a safe online update till the next driver update...
No further important updates I can recall, as always browse the logs http://openpli.git.sourceforge.net/git/gitweb-index.cgi

Bassie
07-05-2012, 10:03 PM
In short some small things did change:

Many fixes in Scanning part, avoid GSOD tuners return invalid data was a nasty one did happen to me a few times.

Some corrections for SNRdB output for afatech/hauppauge nova usb dvb-t sticks, did not show before on the af chipset based sticks.

QAM256 added for DVB-T2.

dazzaa
08-05-2012, 08:10 AM
hi, is it ok to install the sr4 triple tuner driver with this image.

crille4
08-05-2012, 11:16 AM
strange, in this version BA not show up in plugins ? still all image selectable from BA boot menu

Bassie
08-05-2012, 11:41 AM
Combi 3/1 tuners work, config settings as required for this tuner.

dazzaa
08-05-2012, 11:53 AM
so i can install the new driver http://www.sim2800.com/ and can use the tuners together :)
i'll give it a try. Have done the settings thing already
thanks Bassie

Pietjebel
08-05-2012, 04:29 PM
Works ok this is the first image for full cable scan without missing channels on Ziggo

gjstroom
08-05-2012, 08:54 PM
strange, in this version BA not show up in plugins ? still all image selectable from BA boot menu
I almost can't imagine BA was ever in the PLi downloads available...

crille4
08-05-2012, 10:02 PM
;) you don't understand, when you install this version then BA dissapear from plugin menu (not download) but its not only BA, even the usb stick is gone, somehow its like the usb stick unmounts after BA boot menu

I almost can't imagine BA was ever in the PLi downloads available...
Ok, I understand your problem now. But I can't help, I'm not a BA fan...

fjorger
08-05-2012, 11:54 PM
This is caused course some Polish (cyfra/cyfrowy), Spanish (TV-Cabo) and Portugese providers on Hotbird and Hispasat are using shared PMT in channels.

The problem is not image related, and also no vlc version problem you are right about that :)

"PS: Just a Hint for those trying to figure out what's causing MPEG2 channels stream fail. I think this is a WEBINTERFACE related problem"

You are again right and its fixed since 25 march ( Enable streaming of channels with shared PMT) after a polish and a portugese guy did bug-report this problem in the Openwebif thread from PLi board.

So as long as you are using Openwebif on images that support this webif you have no problems streaming channels with shared PMT, nothing wierd about that :)

When using the default webif from dmm this stream problem happens, to make it work you have to report to dream developers of the webif so they can fix it.


Hi Bassie,

Thanks for all the explanation :)
Now I know :D

Best regards,

fjorger.

fjorger
08-05-2012, 11:56 PM
New image in start post: OpenPLi-2.1-beta-dm800se-20120507-sim210-ssl84b !
PLi moved to driver version 0322, with this version you can do a safe online update till the next driver update...
No further important updates I can recall, as always browse the logs http://openpli.git.sourceforge.net/git/gitweb-index.cgi


Great work Gjstroom,

Thanks for the new image ;)

Regards,

fjorger.

rawos
09-05-2012, 07:53 PM
unfortunatelly with this new version the usb dtt turner avermedia a867 "sky digital key" no longer work for me.
It finds correctly the channel list but when i try to watch a channel it says tuning failed, with the april image everything is ok

tigersaid
10-05-2012, 11:58 AM
On next update can you include the tunisiasat-addons-manager_3.0 preinstalled and tuxbox command?

fjorger
10-05-2012, 12:26 PM
unfortunatelly with this new version the usb dtt turner avermedia a867 "sky digital key" no longer work for me.
It finds correctly the channel list but when i try to watch a channel it says tuning failed, with the april image everything is ok

I had the same problem with and DVB-C/T USB tuner from Sundtek, but upon using a new driver from them :)
Problem fixed.

It's not gjstroom fault, it's something the OPENPli team did change on their lastest images.

Can you please ask support from the guys that were in charge of building your tuner driver? If not, stick with the lastest image that works :(

Regards,

fjorger.

Bassie
10-05-2012, 01:27 PM
It's not gjstroom fault, it's something the OPENPli team did change on their lastest images.


True, they did switch from dvbapi3 to dvbapi5 recently.

Pietjebel
10-05-2012, 02:15 PM
Same experience here with the newest PLI problems with trialtuner 103B. Returned to PLI 20120402 is ok.

fjorger
11-05-2012, 12:15 AM
True, they did switch from dvbapi3 to dvbapi5 recently.

Again, thanks for the info ;)

Highly appreciated.

regards,

fjorger.

dima9751
11-05-2012, 10:14 AM
Hello to Everyone.

I have some questions, maybe someone have answer to them.

1. Why recording from enigma 3.2 image (like nemesis dreamelite) not playing on Openpli or sifteam(use openpli enigma) images? vice versa is working

2. Do we lose something important (features, possibilities, bug fixes) if use enigma 2.7 (OpenPli) and not enigma 3.2(nemesis other)?

Always for clones.

Thanks at advance.

Mavve
11-05-2012, 10:32 AM
I have no problem playing recordings on my DM500hd with Merlin that are recorded on my dm8k or dm800se with openpli. Or the other way, recorded on dm500 and play it on the my other boxes. (just tried Merlin too check if i could get DTS to work, use to have openpli on the dm500 to.)

gjstroom
11-05-2012, 07:01 PM
On next update can you include the tunisiasat-addons-manager_3.0 preinstalled and tuxbox command?
Nope, I don't include foreign software packages. I only make clean images. There are lots of images with all kinds of addons, shitty wallpapers and spinners available on this board.

gjstroom
11-05-2012, 07:05 PM
Same experience here with the newest PLI problems with trialtuner 103B. Returned to PLI 20120402 is ok.
Ok, the last trialtuner didn't work for me as well. I did some testing for team Prz Italy.
I retry it with the previous version and try to sort out what causes this, it's probably the dvbapi 5 move like Bassie said...

[edit]
I can confirm trialtuner works fine with version 20120402, even cable scan works ! I also informed team Prz Italy about this.

Pietjebel
12-05-2012, 11:44 AM
@gjstroom
Thanks for your reply, cable etc is working like a charm on the 20120402 detects all the channels even on QAM 256 Ziggo-NL.
Will new version bring improvements.

Keep it simple and efficient use PLI !!!!!!!!

IAmATeaf
12-05-2012, 03:32 PM
After flashing this image how much free flash space should there be? Not a biggie but I've always had 15-16mb free but after flashing this latest I only have 14mb free. As I said not really a problem or issue but I'm just curious as the nfi for this and the last are roughly the same size.

tigersaid
12-05-2012, 07:51 PM
I can't find any Newcamd525 or Camd3 that works with this Image...
Is there in the list of Softcams in Addons? Because I cant find it to work... Only Cccam that it installs correctly.

gjstroom
12-05-2012, 08:36 PM
After flashing this image how much free flash space should there be? Not a biggie but I've always had 15-16mb free but after flashing this latest I only have 14mb free. As I said not really a problem or issue but I'm just curious as the nfi for this and the last are roughly the same size.

root@dm800sr4:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 60.0M 42.7M 17.3M 71% /

Only oscam-experimental installed as additional add-on.

gjstroom
12-05-2012, 08:39 PM
I can't find any Newcamd525 or Camd3 that works with this Image...
Is there in the list of Softcams in Addons? Because I cant find it to work... Only Cccam that it installs correctly.
These are the downloadable softcams from the plugins menu:
enigma2-plugin-softcams-cccam - 2.3.0-r0 - CCcam 2.3.0 softcam
enigma2-plugin-softcams-cccam209 - 2.0.9-r0 - Older CCcam 2.0.9 softcam
enigma2-plugin-softcams-cccam221 - 2.2.1-r0 - Older CCcam 2.2.1 softcam
enigma2-plugin-softcams-customcam - 1-r0 - Custom softcam example and support scripts
enigma2-plugin-softcams-evocamd - 2.17-r1 - evocamd 2.17 softcam
enigma2-plugin-softcams-mgcamd - 1.35a-r5 - mgcamd 1.35a softcam
enigma2-plugin-softcams-mgcamd - 1.30d-r5 - mgcamd 1.30d softcam
enigma2-plugin-softcams-newcs - 1.67RC1-r4 - newcs 1.67RC1 cardserver
enigma2-plugin-softcams-older-scam - 3.59 - scam 3.59 softcam
enigma2-plugin-softcams-oscam-experimental - 1.20-r4.1 - oscam-experimental 1.20 Open Source Softcam
enigma2-plugin-softcams-oscam-experimental-cs - 1.20-r0 - oscam-experimental as cardserver
enigma2-plugin-softcams-oscam-stable - 1.10-r4.1 - oscam-stable 1.10 Open Source Softcam
enigma2-plugin-softcams-oscam-stable-cs - 1.10-r0 - oscam-stable as cardserver
enigma2-plugin-softcams-oscam-unstable - 1.10-r4.1 - oscam-unstable 1.10 Open Source Softcam
enigma2-plugin-softcams-oscam-unstable-cs - 1.10-r0 - oscam-unstable as cardserver
enigma2-plugin-softcams-rqcamd - 1.31-r0 - rqcamd 1.31 softcam
enigma2-plugin-softcams-sbox - 0.4.6 - sbox 0.4.6 softcam - scam 3.60 softcamams-scam - 3.60
enigma2-plugin-softcams-scam - 3.53-r2 - scam 3.53 softcam

If you want camd3 or newcamd525 checkout oscam.

tigersaid
12-05-2012, 10:40 PM
These are the downloadable softcams from the plugins menu:
enigma2-plugin-softcams-cccam - 2.3.0-r0 - CCcam 2.3.0 softcam
enigma2-plugin-softcams-cccam209 - 2.0.9-r0 - Older CCcam 2.0.9 softcam
enigma2-plugin-softcams-cccam221 - 2.2.1-r0 - Older CCcam 2.2.1 softcam
enigma2-plugin-softcams-customcam - 1-r0 - Custom softcam example and support scripts
enigma2-plugin-softcams-evocamd - 2.17-r1 - evocamd 2.17 softcam
enigma2-plugin-softcams-mgcamd - 1.35a-r5 - mgcamd 1.35a softcam
enigma2-plugin-softcams-mgcamd - 1.30d-r5 - mgcamd 1.30d softcam
enigma2-plugin-softcams-newcs - 1.67RC1-r4 - newcs 1.67RC1 cardserver
enigma2-plugin-softcams-older-scam - 3.59 - scam 3.59 softcam
enigma2-plugin-softcams-oscam-experimental - 1.20-r4.1 - oscam-experimental 1.20 Open Source Softcam
enigma2-plugin-softcams-oscam-experimental-cs - 1.20-r0 - oscam-experimental as cardserver
enigma2-plugin-softcams-oscam-stable - 1.10-r4.1 - oscam-stable 1.10 Open Source Softcam
enigma2-plugin-softcams-oscam-stable-cs - 1.10-r0 - oscam-stable as cardserver
enigma2-plugin-softcams-oscam-unstable - 1.10-r4.1 - oscam-unstable 1.10 Open Source Softcam
enigma2-plugin-softcams-oscam-unstable-cs - 1.10-r0 - oscam-unstable as cardserver
enigma2-plugin-softcams-rqcamd - 1.31-r0 - rqcamd 1.31 softcam
enigma2-plugin-softcams-sbox - 0.4.6 - sbox 0.4.6 softcam - scam 3.60 softcamams-scam - 3.60
enigma2-plugin-softcams-scam - 3.53-r2 - scam 3.53 softcam

If you want camd3 or newcamd525 checkout oscam.


I am sorry but when I try to DL any softcam in the addons such as oscam, experimental, stable, unstable i get error..
Collected errors:
opkg_downloads failed to download.
wget returned 255.
Perhaps you need to run 'opkg update'?

http://img715.imageshack.us/img715/5162/20120513002753.jpg


And when I do so, I do write opkg update in telnet i get this:

">>> DONE <<<
root@dm800se:~# opkg update
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/3rd-party
Packages.gz.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/all/Packa
es.gz.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/dm800se/P
ckages.gz.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/Pa
kages.gz.
Collected errors:
* opkg_download: Failed to download http://downloads.pli-images.org/feeds/open
li-2.1/dm800se/3rd-party/Packages.gz, wget returned 255.
* opkg_download: Failed to download http://downloads.pli-images.org/feeds/open
li-2.1/dm800se/all/Packages.gz, wget returned 255.
* opkg_download: Failed to download http://downloads.pli-images.org/feeds/open
li-2.1/dm800se/dm800se/Packages.gz, wget returned 255.
* opkg_download: Failed to download http://downloads.pli-images.org/feeds/open
li-2.1/dm800se/mipsel/Packages.gz, wget returned 255.



I also do an IPKG update in DCC and get this:

root@dm800se:~# export http_proxy=''; echo ">>> DONE <<<";
>>> DONE <<<
root@dm800se:~# ipkg-cl update; echo ">>> DONE <<<";
-sh: ipkg-cl: not found
>>> DONE <<<
root@dm800se:~#


http://img812.imageshack.us/img812/4603/20120513003047.jpg

any Ideas? anyone maybe?

dimoune
13-05-2012, 06:31 AM
Hi,

I've been desperately trying to install cccam 2.1.3 with this image, but to no avail. There is hardly one or two postings on the subject on this forum. It is not clear enough for a layman like me! Thanks in advance for any help.

IAmATeaf
13-05-2012, 04:15 PM
Looks like the servers are down doesn't it?

gjstroom
13-05-2012, 06:23 PM
I am sorry but when I try to DL any softcam in the addons such as oscam, experimental, stable, unstable i get error..
Collected errors:
opkg_downloads failed to download.
wget returned 255.
Perhaps you need to run 'opkg update'?
No problems here:

root@dm800se:~# opkg update
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/3rd-party/Packages.gz.
Inflating http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/3rd-party/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/all/Packages.gz.
Inflating http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/all/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-all.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/dm800se/Packages.gz.
Inflating http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/dm800se/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-dm800se.
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/Packages.gz.
Inflating http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-mipsel.
root@dm800se:~# opkg install enigma2-plugin-softcams-oscam-experimental
Installing enigma2-plugin-softcams-oscam-experimental (1.20-r4.1) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/all/enigma2-plugin-softcams-oscam-experimental_1.20-r4.1_all.ipk.
Installing oscam-experimental (svn6785-r0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/oscam-experimental_svn6785-r0_mipsel.ipk.
Installing softcam-support (1-r1) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-2.1/dm800se/mipsel/softcam-support_1-r1_mipsel.ipk.
Configuring oscam-experimental.
update-alternatives: removing //usr/bin/oscam-experimental 10 as no more alternatives exist for it
sh: 10: unknown operand
Configuring softcam-support.
Adding system startup for /etc/init.d/softcam.
Configuring enigma2-plugin-softcams-oscam-experimental.
Switching default softcam to oscam-experimental
Softcam is selected as default, (re)starting oscam-experimental
no /usr/bin/oscam-experimental found; none killed

gjstroom
13-05-2012, 06:26 PM
I've been desperately trying to install cccam 2.1.3 with this image, but to no avail. There is hardly one or two postings on the subject on this forum. It is not clear enough for a layman like me! Thanks in advance for any help.
cccam 2.1.3 is not a PLi downloadable plugin. You need to search for one and install manually.

rawos
14-05-2012, 02:40 AM
True, they did switch from dvbapi3 to dvbapi5 recently.

thanks, maybe i've found a fix to try here http://openpli.git.sourceforge.net/git/gitweb.cgi?p=openpli/openembedded;a=commit;h=fc3ec86
but i don't know what to do with the .patch file

cokesux
14-05-2012, 04:39 AM
The patch would've been added as of April 10th... But as it appears under linux-etxx00, I'd assume it was never applied to the DMM boxes, but was rather a fix for ET boxes (unless there's a similar patch aimed at DMM)... The OpenPLi team covers a wide range of boxes besides Dreammultimedia's...

--

gjstroom
14-05-2012, 06:33 PM
It's a driver problem, the current drivers running on kernel 2.6 don't support dvbapi5 full, the new ones running on kernel 3.2 are supposed to be 100% dvbapi5...

Haroon
16-05-2012, 08:16 AM
Can anyone please suggest wifi adaptar for PLI image.

Please confirm that TP Link WN321G version 4 & 5 are compatible.

rawos
16-05-2012, 10:29 PM
It's a driver problem, the current drivers running on kernel 2.6 don't support dvbapi5 full, the new ones running on kernel 3.2 are supposed to be 100% dvbapi5...

thanks, i had to switch to italysat 2.0 image (which is now openpli based) because they implement that patch for my usb dtt

gjstroom
18-05-2012, 09:34 PM
Take care when doing a online update, PLi updated their drivers to 20120328 !

Now on the box:
opkg list_installed |grep dreambox-dvb-modules
dreambox-dvb-modules - 2.6.18-7.4-dm800se-20120322-r6.3

New:
opkg list |grep dreambox-dvb-modules
dreambox-dvb-modules - 2.6.18-7.4-dm800se-20120328-r6.3 - Hardware drivers for Dreambox

You can trick the update process by editting /usr/lib/opkg/status

search for these lines:
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20120322-r6.3

change it to:
Package: dreambox-dvb-modules
Version: 2.6.18-7.4-dm800se-20120328-r6.3

Note: This will be active tomorrow (20120519) !

tigersaid
24-05-2012, 08:00 PM
Now I have flashed my box again with the image and now it works to download from Addons list.
But now I get Tuner "failure" allot of times on channels wich should work perfectly. Any ideas?

dimoune
24-05-2012, 09:00 PM
Now I have flashed my box again with the image and now it works to download from Addons list.
But now I get Tuner "failure" allot of times on channels wich should work perfectly. Any ideas?

Just restart the box.

dizzynonun
24-05-2012, 09:46 PM
Now I have flashed my box again with the image and now it works to download from Addons list.
But now I get Tuner "failure" allot of times on channels wich should work perfectly. Any ideas?

I'm having the same problem today. I restarted the box several times but it didn't solve anything. First I thought that my diseqc switch got malfunctioned, but now I read your message and you are having the same problem after the update. I hope they solve it tomorrow.

tigersaid
24-05-2012, 10:02 PM
I'm having the same problem today. I restarted the box several times but it didn't solve anything. First I thought that my diseqc switch got malfunctioned, but now I read your message and you are having the same problem after the update. I hope they solve it tomorrow.

my friend have the same problem as me. so we are more than one..

jeffphil
24-05-2012, 10:04 PM
I think what you are experiencing is a known problem with a few boxes and the 20120322 drivers and issues with the tuner I think the only solution is to revert to an earlier version of the driver. I am just a newbie to this so hopefully an expert will correct me if I am wrong.

dizzynonun
25-05-2012, 01:02 PM
i solved my problem. it wasn't pli or something. i replaced my diseqc switch and everything is ok now. so your problem shouldn't be about the new drivers, something else. i suggest you to try another diseqc switch before further digging into this problem..

gjstroom
26-05-2012, 06:33 PM
New Image 20120526
-new bootlogo (OpenPLi 3.0)
-20120328 drivers (no need to do the 'status' patch)
-revert to dreambox-bootlogo_8.2 (the newer one doesn't display proper on my Philips Brillance 200P monitor)

secaspider
27-05-2012, 09:24 AM
I recorded Some videos in HD from my mobile format mp4 and I can watch the picture on the Sunray4 but no sound on the last openpli. How I can listen the sound, what plugin or driver I need??, Thanks

dizzynonun
27-05-2012, 05:55 PM
New Image 20120526
-new bootlogo (OpenPLi 3.0)
-20120328 drivers (no need to do the 'status' patch)
-revert to dreambox-bootlogo_8.2 (the newer one doesn't display proper on my Philips Brillance 200P monitor)

i installed the latest image with no problems, then i restored my backup and the device gets stuck at the startup.. the progress bar on the little screen doesn't pass the letter "e" of the word "Multimedia" it continiously stays there and every 20 seconds the gear wheels turn on the top left of the boot screen.. i guess a plugin of mine is not compatible with your new image.

i will keep you posted if i solve the problem. could you let us know what else did you or pli changed since the previous image?

cokesux
27-05-2012, 06:03 PM
Occasionally I have to ditch the settings backups on a reflash, sometimes it just refuses to work with the saved settings & I have to start from scratch.

That said, you can try reflashing & download/install any addons you had, before applying the settings backup. Sometimes that works fine...

--

Ps. If using the autobackup plugin you may have to go in and delete those backups (or rename/move if you want them saved). You can probably access them & the box through telnet or FTP, usually it's just Enigma2 respawning, the box itself is actually up & running fine...

remmils
27-05-2012, 06:59 PM
softcam isn't available with these tweaked image of 26 may open pli.

gjstroom
27-05-2012, 09:13 PM
softcam isn't available with these tweaked image of 26 may open pli.
If you want some help please specify you problem...
You can downloads softcams in the plugins menu and the press the green button.

gjstroom
27-05-2012, 09:15 PM
i installed the latest image with no problems, then i restored my backup and the device gets stuck at the startup.. the progress bar on the little screen doesn't pass the letter "e" of the word "Multimedia" it continiously stays there and every 20 seconds the gear wheels turn on the top left of the boot screen.. i guess a plugin of mine is not compatible with your new image.

A complete powercycle also helps some time ! My advise always do a powercycle instead of a reboot after the flash !

crille4
27-05-2012, 10:15 PM
i have found no support in any image for samsung mp4/aac you have to change sound codec in PC or phone with software, i use tsmuxer

I recorded Some videos in HD from my mobile format mp4 and I can watch the picture on the Sunray4 but no sound on the last openpli. How I can listen the sound, what plugin or driver I need??, Thanks

dizzynonun
28-05-2012, 01:26 AM
A complete powercycle also helps some time ! My advise always do a powercycle instead of a reboot after the flash !

well, the problem doesn't occur after the flash, it occurs after the restore of the settings. i couldn't find a way to resolve it, so i did it as installing my plugins and softcams from the scratch and restoring my channels using dreamboxedit and setting all the preferences from the scratch as cokesux said.. it took about an hour
but my new backup will surely work for the upcoming images.

for the conclusion; in your previous image, there were 2 packages that were never getting updated; the package enigma2 (wasn't able to update this package since 8 may) and the bootlogo. i think those were in my backup and they couldn't be restored after installing your new image, and that was causing this problem.. anyway, those who read this message now know how to handle it..

amon35
28-05-2012, 12:18 PM
OpenPLi v3.0

cokesux
28-05-2012, 04:29 PM
OpenPLi v3.0
Purple green

amon35
28-05-2012, 08:55 PM
Purple green
What??????

cokesux
28-05-2012, 10:38 PM
Exactly!

--

firsyah
29-05-2012, 04:25 PM
Does anyone know how to expand flash into hdd on PLI!

2pac76
30-05-2012, 09:11 PM
hi

the multiupload link in the 1st page doesn´t work please fix it

thanks

dixeflatline
31-05-2012, 12:39 AM
cant download either. page is blank....

cokesux
31-05-2012, 12:52 AM
http://www.2shared.com/file/19Fpu-1K/OpenPLi-21-beta-dm800se-201205.html
http://www.putlocker.com/file/F485B08DC7F22954

Thank gj...

dixeflatline
31-05-2012, 04:59 AM
http://www.2shared.com/file/19Fpu-1K/OpenPLi-21-beta-dm800se-201205.html
http://www.putlocker.com/file/F485B08DC7F22954

Thank gj...

Thank you sir! the links works!

phano
31-05-2012, 08:10 PM
Just installed the latest version of this. Everything working fine........Thanks again gjstroom.

Does anyone know if the EPG is still defaulting to the internal memory? I will keep it disabled until I know that is stay's pointing at
my usb stick.

Cheers phano

IAmATeaf
04-06-2012, 03:41 PM
Just installed the latest version of this. Everything working fine........Thanks again gjstroom.

Does anyone know if the EPG is still defaulting to the internal memory? I will keep it disabled until I know that is stay's pointing at
my usb stick.

Cheers phano

What version of CrossEPG are you using?

I investigated this issue and produced some updated code which I passed onto the author on the GIT site. From what I know the latest git290 version and newer should have updated files which fixes this issue.

I'm currently looking at the issue where CrossEPG randomly fails to update the actual EPG cache data, again have some revised code for this which I'm currently testing, as soon as I can confirm that the changes work and fix the issue I'll upload the revised file to the CrossEPG GIT site which then should hopefully make it into a build.

phano
04-06-2012, 06:20 PM
Hi IAmATeaf
Not sure if I am using the latest version, I installed it via the pli server last week, I have looked at my packages via dcc, it does'nt give me a version.
So I went to uninstall plugins, and it is not showing as git, it shows as:- crossepg (0.6.2-svn-300-r0)

Does that make any sense?

Cheers phano